Users might want to choose a different clock frequency than whatever the bootloader provided at probe time. Add 'clock-frequency' bindings. Signed-off-by: Nicolas Saenz Julienne <nsaenz@xxxxxxxxxx> --- Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml index 19d84f3ef9e6..9d0d97b2c0a7 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml @@ -35,6 +35,12 @@ properties: type: boolean description: Specifies that controller should use auto CMD12 + clock-frequency: + description: + Should be the frequency (in Hz) of the core clock. If this is specified + and the core clock is specified then we'll try to set the core clock to + this at probe time. + required: - compatible - reg -- 2.30.2