Re: [PATCH v5 08/24] wfx: add bus_sdio.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ulf,

On Monday 22 March 2021 13:20:35 CET Ulf Hansson wrote:
> On Mon, 15 Mar 2021 at 14:25, Jerome Pouiller
> <Jerome.Pouiller@xxxxxxxxxx> wrote:
> >
> > From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> >
> > Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> > ---
> >  drivers/net/wireless/silabs/wfx/bus_sdio.c | 259 +++++++++++++++++++++
> >  1 file changed, 259 insertions(+)
> >  create mode 100644 drivers/net/wireless/silabs/wfx/bus_sdio.c
> 
> [...]
> 
> > +static const struct sdio_device_id wfx_sdio_ids[] = {
> > +       { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
> > +       { },
> > +};
> > +MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
> > +
> > +struct sdio_driver wfx_sdio_driver = {
> > +       .name = "wfx-sdio",
> > +       .id_table = wfx_sdio_ids,
> > +       .probe = wfx_sdio_probe,
> > +       .remove = wfx_sdio_remove,
> > +       .drv = {
> > +               .owner = THIS_MODULE,
> > +               .of_match_table = wfx_sdio_of_match,
> 
> It's not mandatory to support power management, like system
> suspend/resume. However, as this looks like this is a driver for an
> embedded SDIO device, you probably want this.
> 
> If that is the case, please assign the dev_pm_ops here and implement
> the ->suspend|resume() callbacks.

I have no platform to test suspend/resume, so I have only a
theoretical understanding of this subject.

I understanding is that with the current implementation, the
device will be powered off on suspend and then totally reset
(including reloading of the firmware) on resume. I am wrong?

This behavior sounds correct to me. You would expect something
more? 


-- 
Jérôme Pouiller






[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux