On Tue, 2021-03-16 at 19:14 +0800, Seiya Wang wrote:
> Add basic chip support for Mediatek MT8195
>
> Signed-off-by: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 29 ++
> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 477 ++++++++++++++++++++++++++++
> 3 files changed, 507 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index deba27ab7657..aee4b9715d2f 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -16,4 +16,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> new file mode 100644
> index 000000000000..82bb10e9a531
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
> + */
> +/dts-v1/;
> +#include "mt8195.dtsi"
> +
> +/ {
> + model = "MediaTek MT8195 evaluation board";
> + compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> new file mode 100644
> index 000000000000..356583fe4f03
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -0,0 +1,477 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2021 MediaTek Inc.
> + * Author: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + compatible = "mediatek,mt8195";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + clk26m: oscillator0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> + };
[...]
> +
> + nor_flash: nor@1132c000 {
> + compatible = "mediatek,mt8195-nor", "mediatek,mt8173-nor";
> + reg = <0 0x1132c000 0 0x1000>;
> + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&clk26m>, <&clk26m>;
> + clock-names = "spi", "sf";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + u3phy2: usb-phy2@11c40000 {
use t-phy instead of usb-phy2
It's better to run dtbs_check for this patch
> + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
> + clocks = <&clk26m>;
> + clock-names = "u3phya_ref";
No need clocks for v2
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11c40000 0x700>;
> + status = "disabled";
> +
> + u2port2: usb2-phy2@0 {
use usb-phy instead of usb2-phy2
> + reg = <0x0 0x700>;
> + clocks = <&clk26m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "disabled";
I think no need disable it
it's parent node is already disabled. if enable parent node,
we also want to enable all children at the same time.
> + };
> + };
> +
> + u3phy3: usb-phy3@11c50000 {
t-phy@...
> + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
> + clocks = <&clk26m>;
> + clock-names = "u3phya_ref";
No need clocks
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11c50000 0x700>;
> + status = "disabled";
> +
> + u2port3: usb2-phy3@0 {
use usb-phy
> + reg = <0x0 0x700>;
> + clocks = <&clk26m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "disabled";
remove status
> + };
> + };
> +
> + u3phy1: usb-phy1@11e30000 {
t-phy
> + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
> + clocks = <&clk26m>;
> + clock-names = "u3phya_ref";
remove clocks*
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11e30000 0xe00>;
> + status = "disabled";
> +
> + u2port1: usb2-phy1@0 {
usb-phy
> + reg = <0x0 0x700>;
> + clocks = <&clk26m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "disabled";
remove status
> + };
> +
> + u3port1: usb3-phy1@700 {
usb-phy
> + reg = <0x700 0x700>;
> + clocks = <&clk26m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "disabled";
remove status
> + };
> + };
> +
> + u3phy0: usb-phy0@11e40000 {
t-phy
> + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
> + clocks = <&clk26m>;
> + clock-names = "u3phya_ref";
remove clocks*
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11e40000 0xe00>;
> + status = "disabled";
> +
> + u2port0: usb2-phy0@0 {
usb-phy
> + reg = <0x0 0x700>;
> + clocks = <&clk26m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "disabled";
remove status
> + };
> +
> + u3port0: usb3-phy0@700 {
usb-phy
> + reg = <0x700 0x700>;
> + clocks = <&clk26m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "disabled";
remove status
> + };
> + };
> +
> + ufsphy: phy@11fa0000 {
usf-phy instead of phy
> + compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
> + reg = <0 0x11fa0000 0 0xc000>;
> + clocks = <&clk26m>, <&clk26m>;
> + clock-names = "unipro", "mp";
> + #phy-cells = <0>;
disabled?
Thanks a lot
> + };
> + };
> +};
