On Tue, Mar 02, 2021 at 10:45:57AM +0800, Peng Zhou wrote:
> - add crypto clock control and ungate it before CQHCI init
> - set MMC_CAP2_CRYPTO property of eMMC
>
> Signed-off-by: Peng Zhou <peng.zhou@xxxxxxxxxxxx>
> ---
> drivers/mmc/host/mtk-sd.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index de09c6347524..1a5894ec551f 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -442,6 +442,7 @@ struct msdc_host {
> struct clk *src_clk_cg; /* msdc source clock control gate */
> struct clk *sys_clk_cg; /* msdc subsys clock control gate */
> struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
> + struct clk *crypto_clk; /* msdc crypto clock */
> u32 mclk; /* mmc subsystem clock frequency */
> u32 src_clk_freq; /* source clock frequency */
> unsigned char timing;
> @@ -802,6 +803,7 @@ static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
>
> static void msdc_gate_clock(struct msdc_host *host)
> {
> + clk_disable_unprepare(host->crypto_clk);
> clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
> clk_disable_unprepare(host->src_clk_cg);
> clk_disable_unprepare(host->src_clk);
> @@ -822,7 +824,7 @@ static void msdc_ungate_clock(struct msdc_host *host)
> dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
> return;
> }
> -
> + clk_prepare_enable(host->crypto_clk);
> while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> cpu_relax();
> }
> @@ -2510,6 +2512,16 @@ static int msdc_drv_probe(struct platform_device *pdev)
> goto host_free;
> }
>
> + /* only eMMC has crypto property */
> + if ((mmc->caps2 & MMC_CAP2_NO_SD) &&
> + (mmc->caps2 & MMC_CAP2_NO_SDIO)) {
> + host->crypto_clk = devm_clk_get(&pdev->dev, "crypto");
> + if (IS_ERR(host->crypto_clk))
> + host->crypto_clk = NULL;
> + else
> + mmc->caps2 |= MMC_CAP2_CRYPTO;
> + }
> +
> host->irq = platform_get_irq(pdev, 0);
> if (host->irq < 0) {
> ret = -EINVAL;
> @@ -2580,6 +2592,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
> host->dma_mask = DMA_BIT_MASK(32);
> mmc_dev(mmc)->dma_mask = &host->dma_mask;
>
> + /* here ungate due to cqhci init will access registers */
> + msdc_ungate_clock(host);
> if (mmc->caps2 & MMC_CAP2_CQE) {
> host->cq_host = devm_kzalloc(mmc->parent,
> sizeof(*host->cq_host),
> @@ -2616,7 +2630,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
> spin_lock_init(&host->lock);
>
> platform_set_drvdata(pdev, mmc);
> - msdc_ungate_clock(host);
> msdc_init_hw(host);
>
> ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
> --
> 2.18.0
Somehow I can't apply this patch using git am. It looks like the mail
isn't completely plain text (there's some html it seems), which may be
why git am is complaining.
