Dear Maintainers and commiters. Please review this patch for updating. Thanks and regards. DooHyun Hwang. On 17/02/10 4:59 am, DooHyun Hwang wrote: >Subject: [PATCH] mmc: core: add a power cycle when CMD11 fails > >A power cycle is required if CMD11 fails. >CMD11 failure should be handled as no response. > >If there is a timeout error that means no response to the CMD11, do not >send the CMD11 again and the power cycle is required. >Any other errors for CMD11 are the same because CMD11 failed. > >On some bad SD Card, CMD11 may fail but the card may have already invoked >the voltage switch sequence. >In this case, it is necessary to retry without voltage switching after >power cycle. > >Signed-off-by: DooHyun Hwang <dh0421.hwang@xxxxxxxxxxx>
