Re: [PATCH v3] mmc: mmci: Convert bindings to DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 19 Jan 2021 at 11:06, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>
> This converts the MMCI bindings from simple text to a proper
> schema.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Marek Vasut <marex@xxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe


> ---
> ChangeLog v2->v3:
> - Drop "dmas" and "dma-names" that are already part of the
>   generic schema. Sorry for missing this in v2.
> ChangeLog v1->v2:
> - Use unevaluatedProperties: false instead of
>   additionalProperties: false and refs start working.
> - Define clocks to 1 or 2 items.
> - Define interrupts to 1 or 2 items.
> ---
>  .../devicetree/bindings/mmc/arm,pl18x.yaml    | 203 ++++++++++++++++++
>  .../devicetree/bindings/mmc/mmci.txt          |  74 -------
>  2 files changed, 203 insertions(+), 74 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mmc/mmci.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
> new file mode 100644
> index 000000000000..eddc1f6bdbe5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
> @@ -0,0 +1,203 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij@xxxxxxxxxx>
> +  - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> +
> +description:
> +  The ARM PrimeCells MMCI PL180 and PL181 provides an interface for
> +  reading and writing to MultiMedia and SD cards alike. Over the years
> +  vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO
> +  host controllers with very similar characteristics.
> +
> +allOf:
> +  - $ref: /schemas/arm/primecell.yaml#
> +  - $ref: mmc-controller.yaml#
> +
> +# We need a select here so we don't match all nodes with 'arm,primecell'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - arm,pl180
> +          - arm,pl181
> +          - arm,pl18x
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: The first version of the block, simply called
> +          PL180 and found in the ARM Integrator IM/PD1 logic module.
> +        items:
> +          - const: arm,pl180
> +          - const: arm,primecell
> +      - description: The improved version of the block, found in the
> +          ARM Versatile and later reference designs. Further revisions
> +          exist but get detected at runtime by reading some magic numbers
> +          in the PrimeCell ID registers.
> +        items:
> +          - const: arm,pl181
> +          - const: arm,primecell
> +      - description: Wildcard entry that will let the operating system
> +          inspect the PrimeCell ID registers to determine which hardware
> +          variant of PL180 or PL181 this is.
> +        items:
> +          - const: arm,pl18x
> +          - const: arm,primecell
> +
> +  clocks:
> +    description: One or two clocks, the "apb_pclk" and the "MCLK"
> +      which is the core block clock. The names are not compulsory.
> +    minItems: 1
> +    maxItems: 2
> +
> +  power-domains: true
> +
> +  resets:
> +    maxItems: 1
> +
> +  reg:
> +    description: the MMIO memory window must be exactly 4KB (0x1000) and the
> +      layout should provide the PrimeCell ID registers so that the device can
> +      be discovered. On ST Micro variants, a second register window may be
> +      defined if a delay block is present and used for tuning.
> +
> +  interrupts:
> +    description: The first interrupt is the command interrupt and corresponds
> +      to the event at the end of a command. The second interrupt is the
> +      PIO (polled I/O) interrupt and occurs when the FIFO needs to be
> +      emptied as part of a bulk read from the card. Some variants have these
> +      two interrupts wired into the same line (logic OR) and in that case
> +      only one interrupt may be provided.
> +    minItems: 1
> +    maxItems: 2
> +
> +  st,sig-dir-dat0:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, bus signal direction pins used for
> +      DAT[0].
> +
> +  st,sig-dir-dat2:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, bus signal direction pins used for
> +      DAT[2].
> +
> +  st,sig-dir-dat31:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, bus signal direction pins used for
> +      DAT[3] and DAT[1].
> +
> +  st,sig-dir-dat74:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, bus signal direction pins used for
> +      DAT[7] and DAT[4].
> +
> +  st,sig-dir-cmd:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, CMD signal direction used for
> +      pin CMD.
> +
> +  st,sig-pin-fbclk:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, feedback clock FBCLK signal pin
> +      in use.
> +
> +  st,sig-dir:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, signal direction polarity used for
> +      pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].
> +
> +  st,neg-edge:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, data and command phase relation,
> +      generated on the sd clock falling edge.
> +
> +  st,use-ckin:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: ST Micro-specific property, use CKIN pin from an external
> +      driver to sample the receive data (for example with a voltage switch
> +      transceiver).
> +
> +unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    mmc@5000 {
> +      compatible = "arm,pl180", "arm,primecell";
> +      reg = <0x5000 0x1000>;
> +      interrupts-extended = <&vic 22 &sic 1>;
> +      clocks = <&xtal24mhz>, <&pclk>;
> +      clock-names = "mclk", "apb_pclk";
> +    };
> +
> +    mmc@80126000 {
> +      compatible = "arm,pl18x", "arm,primecell";
> +      reg = <0x80126000 0x1000>;
> +      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
> +      dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;
> +      dma-names = "rx", "tx";
> +      clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
> +      clock-names = "sdi", "apb_pclk";
> +      max-frequency = <100000000>;
> +      bus-width = <4>;
> +      cap-sd-highspeed;
> +      cap-mmc-highspeed;
> +      cd-gpios  = <&gpio2 31 0x4>;
> +      st,sig-dir-dat0;
> +      st,sig-dir-dat2;
> +      st,sig-dir-cmd;
> +      st,sig-pin-fbclk;
> +      vmmc-supply = <&ab8500_ldo_aux3_reg>;
> +      vqmmc-supply = <&vmmci>;
> +    };
> +
> +    mmc@101f6000 {
> +      compatible = "arm,pl18x", "arm,primecell";
> +      reg = <0x101f6000 0x1000>;
> +      clocks = <&sdiclk>, <&pclksdi>;
> +      clock-names = "mclk", "apb_pclk";
> +      interrupt-parent = <&vica>;
> +      interrupts = <22>;
> +      max-frequency = <400000>;
> +      bus-width = <4>;
> +      cap-mmc-highspeed;
> +      cap-sd-highspeed;
> +      full-pwr-cycle;
> +      st,sig-dir-dat0;
> +      st,sig-dir-dat2;
> +      st,sig-dir-dat31;
> +      st,sig-dir-cmd;
> +      st,sig-pin-fbclk;
> +      vmmc-supply = <&vmmc_regulator>;
> +    };
> +
> +    mmc@52007000 {
> +      compatible = "arm,pl18x", "arm,primecell";
> +      arm,primecell-periphid = <0x10153180>;
> +      reg = <0x52007000 0x1000>;
> +      interrupts = <49>;
> +      interrupt-names = "cmd_irq";
> +      clocks = <&rcc 0>;
> +      clock-names = "apb_pclk";
> +      resets = <&rcc 1>;
> +      cap-sd-highspeed;
> +      cap-mmc-highspeed;
> +      max-frequency = <120000000>;
> +    };
> diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
> deleted file mode 100644
> index 4ec921e4bf34..000000000000
> --- a/Documentation/devicetree/bindings/mmc/mmci.txt
> +++ /dev/null
> @@ -1,74 +0,0 @@
> -* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
> -
> -The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
> -reading and writing to MultiMedia and SD cards alike.
> -
> -This file documents differences between the core properties described
> -by mmc.txt and the properties used by the mmci driver. Using "st" as
> -the prefix for a property, indicates support by the ST Micro variant.
> -
> -Required properties:
> -- compatible             : contains "arm,pl18x", "arm,primecell".
> -- vmmc-supply            : phandle to the regulator device tree node, mentioned
> -                           as the VCC/VDD supply in the eMMC/SD specs.
> -
> -Optional properties:
> -- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
> -                           the ID provided by the HW
> -- resets                 : phandle to internal reset line.
> -                          Should be defined for sdmmc variant.
> -- vqmmc-supply           : phandle to the regulator device tree node, mentioned
> -                           as the VCCQ/VDD_IO supply in the eMMC/SD specs.
> -specific for ux500 variant:
> -- st,sig-dir-dat0        : bus signal direction pin used for DAT[0].
> -- st,sig-dir-dat2        : bus signal direction pin used for DAT[2].
> -- st,sig-dir-dat31       : bus signal direction pin used for DAT[3] and DAT[1].
> -- st,sig-dir-dat74       : bus signal direction pin used for DAT[4] to DAT[7].
> -- st,sig-dir-cmd         : cmd signal direction pin used for CMD.
> -- st,sig-pin-fbclk       : feedback clock signal pin used.
> -
> -specific for sdmmc variant:
> -- reg                   : a second base register may be defined if a delay
> -                           block is present and used for tuning.
> -- st,sig-dir             : signal direction polarity used for cmd, dat0 dat123.
> -- st,neg-edge            : data & command phase relation, generated on
> -                           sd clock falling edge.
> -- st,use-ckin            : use ckin pin from an external driver to sample
> -                           the receive data (example: with voltage
> -                          switch transceiver).
> -
> -Deprecated properties:
> -- mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable.
> -- mmc-cap-sd-highspeed   : indicates whether SD is high speed capable.
> -
> -Example:
> -
> -sdi0_per1@80126000 {
> -       compatible = "arm,pl18x", "arm,primecell";
> -       reg = <0x80126000 0x1000>;
> -       interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
> -
> -       dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
> -              <&dma 29 0 0x0>; /* Logical - MemToDev */
> -       dma-names = "rx", "tx";
> -
> -       clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
> -       clock-names = "sdi", "apb_pclk";
> -
> -       max-frequency = <100000000>;
> -       bus-width = <4>;
> -       cap-sd-highspeed;
> -       cap-mmc-highspeed;
> -       cd-gpios  = <&gpio2 31 0x4>; // 95
> -       st,sig-dir-dat0;
> -       st,sig-dir-dat2;
> -       st,sig-dir-cmd;
> -       st,sig-pin-fbclk;
> -
> -       vmmc-supply = <&ab8500_ldo_aux3_reg>;
> -       vqmmc-supply = <&vmmci>;
> -
> -       pinctrl-names = "default", "sleep";
> -       pinctrl-0 = <&sdi0_default_mode>;
> -       pinctrl-1 = <&sdi0_sleep_mode>;
> -};
> --
> 2.29.2
>



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux