Re: [RFC PATCH v3.1 12/27] mmc: sdhci-uhs2: add reset function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/11/20 4:27 am, AKASHI Takahiro wrote:
> Sdhci_uhs2_reset() does a UHS-II specific reset operation.
> 
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-uhs2.c | 49 +++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci-uhs2.h |  1 +
>  drivers/mmc/host/sdhci.c      |  3 ++-
>  drivers/mmc/host/sdhci.h      |  1 +
>  4 files changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 08905ed081fb..e2b9743fe17d 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -10,6 +10,7 @@
>   *  Author: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/module.h>
>  
>  #include "sdhci.h"
> @@ -49,6 +50,54 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host)
>  }
>  EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
>  
> +/*****************************************************************************\
> + *                                                                           *
> + * Low level functions                                                       *
> + *                                                                           *
> +\*****************************************************************************/
> +
> +/**
> + * sdhci_uhs2_reset - invoke SW reset
> + * @host: SDHCI host
> + * @mask: Control mask
> + *
> + * Invoke SW reset, depending on a bit in @mask and wait for completion.
> + */
> +void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
> +{
> +	unsigned long timeout;
> +
> +	if (!(host->mmc->caps & MMC_CAP_UHS2))

Please make a helper so this can be like:

	if (!sdhci_uhs2_mode(host))

The capability will be always present for hosts that support UHS2, but not
all cards support UHS2 mode.  I suggest just adding a bool to struct
sdhci_host to keep track of when the host is in UHS2 mode.

> +		return;
> +
> +	sdhci_writew(host, mask, SDHCI_UHS2_SW_RESET);
> +
> +	if (mask & SDHCI_UHS2_SW_RESET_FULL) {
> +		host->clock = 0;
> +		/* Reset-all turns off SD Bus Power */
> +		if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)

I would prefer not to support any legacy quirks that we do not need right
now.  Just be sure to add a comment somewhere listing which quirks are not
supported for UHS2 host controllers.

> +			sdhci_runtime_pm_bus_off(host);
> +	}
> +
> +	/* Wait max 100 ms */
> +	timeout = 10000;
> +
> +	/* hw clears the bit when it's done */
> +	while (sdhci_readw(host, SDHCI_UHS2_SW_RESET) & mask) {

This kind of loop can now be done with read_poll_timeout_atomic(sdhci_readw,
..., host, SDHCI_UHS2_SW_RESET)

> +		if (timeout == 0) {
> +			pr_err("%s: %s: Reset 0x%x never completed.\n",
> +			       __func__, mmc_hostname(host->mmc), (int)mask);
> +			pr_err("%s: clean reset bit\n",
> +			       mmc_hostname(host->mmc));
> +			sdhci_writeb(host, 0, SDHCI_UHS2_SW_RESET);
> +			return;
> +		}
> +		timeout--;
> +		udelay(10);
> +	}
> +}
> +EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
> +
>  /*****************************************************************************\
>   *                                                                           *
>   * Driver init/exit                                                          *
> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
> index b9529d32b58d..7bb7a0d67109 100644
> --- a/drivers/mmc/host/sdhci-uhs2.h
> +++ b/drivers/mmc/host/sdhci-uhs2.h
> @@ -210,5 +210,6 @@
>  struct sdhci_host;
>  
>  void sdhci_uhs2_dump_regs(struct sdhci_host *host);
> +void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
>  
>  #endif /* __SDHCI_UHS2_H */
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index d4a57e8c9bb8..af336bdb4305 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -195,13 +195,14 @@ static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
>  	pm_runtime_get_noresume(host->mmc->parent);
>  }
>  
> -static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
> +void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
>  {
>  	if (!host->bus_on)
>  		return;
>  	host->bus_on = false;
>  	pm_runtime_put_noidle(host->mmc->parent);
>  }
> +EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_off);
>  
>  void sdhci_reset(struct sdhci_host *host, u8 mask)
>  {
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index d9d7a76cedc1..b9932423db08 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -831,6 +831,7 @@ static inline void sdhci_read_caps(struct sdhci_host *host)
>  	__sdhci_read_caps(host, NULL, NULL, NULL);
>  }
>  
> +void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
>  u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
>  		   unsigned int *actual_clock);
>  void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
> 




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux