From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
For GL9755, reduce power consumption by lowering the LFCLK and disabling
the DMACLK on low-power.
Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-pci-gli.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 9887485a4134..f10bdfbfce36 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -97,6 +97,10 @@
#define GLI_9755_WT_EN_ON 0x1
#define GLI_9755_WT_EN_OFF 0x0
+#define PCI_GLI_9755_PECONF 0x44
+#define PCI_GLI_9755_LFCLK GENMASK(14, 12)
+#define PCI_GLI_9755_DMACLK BIT(29)
+
#define PCI_GLI_9755_PLL 0x64
#define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0)
#define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12)
@@ -519,6 +523,21 @@ static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_enable_clk(host, clk);
}
+static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
+{
+ struct pci_dev *pdev = slot->chip->pdev;
+ u32 value;
+
+ gl9755_wt_on(pdev);
+
+ pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value);
+ value &= ~PCI_GLI_9755_LFCLK;
+ value &= ~PCI_GLI_9755_DMACLK;
+ pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value);
+
+ gl9755_wt_off(pdev);
+}
+
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
@@ -534,6 +553,7 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
+ gl9755_hw_setting(slot);
gli_pcie_enable_msi(slot);
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
--
2.29.2
