[PATCH RFT v2 2/3] mmc: tmio: Add data timeout error detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Masaharu Hayakawa <masaharu.hayakawa.ry@xxxxxxxxxxx>

Currently, busy timeout is not checked for data transfer command. But,
if the temperature condition changes, the data cannot be acquired
correctly and timeout may occur. Also, we could reproduce an issue by
using mmc_test driver (e.g. "Correct xfer_size at write (start
failure)"). Therefore, this adds timeout error check.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@xxxxxxxxxxx>
[saito: rework commit message.]
Signed-off-by: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>
[shimoda: rebase, add commit description]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/tmio_mmc.h      |  6 ++++--
 drivers/mmc/host/tmio_mmc_core.c | 17 +++++++++++------
 2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 819198af17f4..15cf850e75d3 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -100,8 +100,10 @@
 /* This is the mask used at reset by the chip */
 #define TMIO_MASK_INIT_RCAR2	0x8b7f031d /* Initial value for R-Car Gen2+ */
 #define TMIO_MASK_ALL           0x837f031d
-#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND)
-#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND)
+#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
+			   TMIO_STAT_DATATIMEOUT)
+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
+			   TMIO_STAT_DATATIMEOUT)
 #define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
 		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
 #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 4727fcfdf95f..541a0cf4a9fa 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -477,8 +477,10 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
 	if (!data)
 		goto out;
 
-	if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
-	    stat & TMIO_STAT_TXUNDERRUN)
+	if (stat & TMIO_STAT_DATATIMEOUT)
+		data->error = -ETIMEDOUT;
+	else if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
+		 stat & TMIO_STAT_TXUNDERRUN)
 		data->error = -EILSEQ;
 	if (host->dma_on && (data->flags & MMC_DATA_WRITE)) {
 		u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
@@ -501,11 +503,13 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
 		}
 
 		if (done) {
-			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND |
+						  TMIO_STAT_DATATIMEOUT);
 			tmio_mmc_dataend_dma(host);
 		}
 	} else if (host->dma_on && (data->flags & MMC_DATA_READ)) {
-		tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
+		tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND |
+					  TMIO_STAT_DATATIMEOUT);
 		tmio_mmc_dataend_dma(host);
 	} else {
 		tmio_mmc_do_data_irq(host);
@@ -619,8 +623,9 @@ static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, int ireg,
 	}
 
 	/* Data transfer completion */
-	if (ireg & TMIO_STAT_DATAEND) {
-		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND);
+	if (ireg & (TMIO_STAT_DATAEND | TMIO_STAT_DATATIMEOUT)) {
+		tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND |
+				      TMIO_STAT_DATATIMEOUT);
 		tmio_mmc_data_irq(host, status);
 		return true;
 	}
-- 
2.28.0




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux