When powering off a card, we need to disable the tuning HW (like SCC for
the Renesas SDHI) to get to a sane state and allow for re-tuning new
cards. This was hidden before because we wrongly did that in hw_reset()
before which was an unintended use of hw_reset(). Now that we corrected
the use of hw_reset() meanwhile, we revealed this shortcoming and need
to fix it properly by explicitly calling the downgrade callback.
Fixes: 6e7d4de10890 ("mmc: renesas_sdhi: move wrong 'hw_reset' to 'reset'")
Suggested-by: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>
Reviewed-by: Takeshi Saito <takeshi.saito.xv@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/tmio_mmc_core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index cfb53d7c63d7..cb4149fd12e0 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -927,6 +927,9 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
tmio_mmc_power_off(host);
+ /* Downgrade ensures a sane state for tuning HW (e.g. SCC) */
+ if (host->mmc->ops->hs400_downgrade)
+ host->mmc->ops->hs400_downgrade(host->mmc);
host->set_clock(host, 0);
break;
case MMC_POWER_UP:
--
2.28.0
