From: Rui Feng <rui_feng@xxxxxxxxxxxxxx> RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows. 1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag. 2.If card is plugged in, Host send CMD8 to ask card's PCIe availability. 3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked, RTS5261 switch to PCIe/NVMe mode. 4.Mmc driver handover it to NVMe driver. 5.If card is unplugged, RTS5261 will switch to SD mode. Signed-off-by: Rui Feng <rui_feng@xxxxxxxxxxxxxx> --- v2:remove duplicate define --- drivers/misc/cardreader/rts5261.c | 4 ++++ drivers/misc/cardreader/rts5261.h | 23 ----------------------- drivers/misc/cardreader/rtsx_pcr.c | 5 +++++ include/linux/rtsx_pci.h | 23 +++++++++++++++++++++++ 4 files changed, 32 insertions(+), 23 deletions(-) diff --git a/drivers/misc/cardreader/rts5261.c b/drivers/misc/cardreader/rts5261.c index 471961487ff8..536c90d4fd76 100644 --- a/drivers/misc/cardreader/rts5261.c +++ b/drivers/misc/cardreader/rts5261.c @@ -738,8 +738,12 @@ void rts5261_init_params(struct rtsx_pcr *pcr) { struct rtsx_cr_option *option = &pcr->option; struct rtsx_hw_param *hw_param = &pcr->hw_param; + u8 val; pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; + rtsx_pci_read_register(pcr, RTS5261_FW_STATUS, &val); + if (!(val & RTS5261_EXPRESS_LINK_FAIL_MASK)) + pcr->extra_caps |= EXTRA_CAPS_SD_EXPRESS; pcr->num_slots = 1; pcr->ops = &rts5261_pcr_ops; diff --git a/drivers/misc/cardreader/rts5261.h b/drivers/misc/cardreader/rts5261.h index ebfdd236a553..8d80f0d5d5d6 100644 --- a/drivers/misc/cardreader/rts5261.h +++ b/drivers/misc/cardreader/rts5261.h @@ -65,23 +65,6 @@ #define RTS5261_FW_EXPRESS_TEST_MASK (0x01<<0) #define RTS5261_FW_EA_MODE_MASK (0x01<<5) -/* FW config register */ -#define RTS5261_FW_CFG0 0xFF54 -#define RTS5261_FW_ENTER_EXPRESS (0x01<<0) - -#define RTS5261_FW_CFG1 0xFF55 -#define RTS5261_SYS_CLK_SEL_MCU_CLK (0x01<<7) -#define RTS5261_CRC_CLK_SEL_MCU_CLK (0x01<<6) -#define RTS5261_FAKE_MCU_CLOCK_GATING (0x01<<5) -/*MCU_bus_mode_sel: 0=real 8051 1=fake mcu*/ -#define RTS5261_MCU_BUS_SEL_MASK (0x01<<4) -/*MCU_clock_sel:VerA 00=aux16M 01=aux400K 1x=REFCLK100M*/ -/*MCU_clock_sel:VerB 00=aux400K 01=aux16M 10=REFCLK100M*/ -#define RTS5261_MCU_CLOCK_SEL_MASK (0x03<<2) -#define RTS5261_MCU_CLOCK_SEL_16M (0x01<<2) -#define RTS5261_MCU_CLOCK_GATING (0x01<<1) -#define RTS5261_DRIVER_ENABLE_FW (0x01<<0) - /* FW status register */ #define RTS5261_FW_STATUS 0xFF56 #define RTS5261_EXPRESS_LINK_FAIL_MASK (0x01<<7) @@ -121,12 +104,6 @@ #define RTS5261_DV3318_19 (0x04<<4) #define RTS5261_DV3318_33 (0x07<<4) -#define RTS5261_LDO1_CFG0 0xFF72 -#define RTS5261_LDO1_OCP_THD_MASK (0x07<<5) -#define RTS5261_LDO1_OCP_EN (0x01<<4) -#define RTS5261_LDO1_OCP_LMT_THD_MASK (0x03<<2) -#define RTS5261_LDO1_OCP_LMT_EN (0x01<<1) - /* CRD6603-433 190319 request changed */ #define RTS5261_LDO1_OCP_THD_740 (0x00<<5) #define RTS5261_LDO1_OCP_THD_800 (0x01<<5) diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c index 37ccc67f4914..6e5c16b4b7d1 100644 --- a/drivers/misc/cardreader/rtsx_pcr.c +++ b/drivers/misc/cardreader/rtsx_pcr.c @@ -990,6 +990,11 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) } else { pcr->card_removed |= SD_EXIST; pcr->card_inserted &= ~SD_EXIST; + if (PCI_PID(pcr) == PID_5261) { + rtsx_pci_write_register(pcr, RTS5261_FW_STATUS, + RTS5261_EXPRESS_LINK_FAIL_MASK, 0); + pcr->extra_caps |= EXTRA_CAPS_SD_EXPRESS; + } } pcr->dma_error_count = 0; } diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h index 745f5e73f99a..b47959f48ccd 100644 --- a/include/linux/rtsx_pci.h +++ b/include/linux/rtsx_pci.h @@ -658,6 +658,19 @@ #define PM_WAKE_EN 0x01 #define PM_CTRL4 0xFF47 +#define RTS5261_FW_CFG0 0xFF54 +#define RTS5261_FW_ENTER_EXPRESS (0x01 << 0) + +#define RTS5261_FW_CFG1 0xFF55 +#define RTS5261_SYS_CLK_SEL_MCU_CLK (0x01 << 7) +#define RTS5261_CRC_CLK_SEL_MCU_CLK (0x01 << 6) +#define RTS5261_FAKE_MCU_CLOCK_GATING (0x01 << 5) +#define RTS5261_MCU_BUS_SEL_MASK (0x01 << 4) +#define RTS5261_MCU_CLOCK_SEL_MASK (0x03 << 2) +#define RTS5261_MCU_CLOCK_SEL_16M (0x01 << 2) +#define RTS5261_MCU_CLOCK_GATING (0x01 << 1) +#define RTS5261_DRIVER_ENABLE_FW (0x01 << 0) + #define REG_CFG_OOBS_OFF_TIMER 0xFEA6 #define REG_CFG_OOBS_ON_TIMER 0xFEA7 #define REG_CFG_VCM_ON_TIMER 0xFEA8 @@ -701,6 +714,13 @@ #define RTS5260_DVCC_TUNE_MASK 0x70 #define RTS5260_DVCC_33 0x70 +/*RTS5261*/ +#define RTS5261_LDO1_CFG0 0xFF72 +#define RTS5261_LDO1_OCP_THD_MASK (0x07 << 5) +#define RTS5261_LDO1_OCP_EN (0x01 << 4) +#define RTS5261_LDO1_OCP_LMT_THD_MASK (0x03 << 2) +#define RTS5261_LDO1_OCP_LMT_EN (0x01 << 1) + #define LDO_VCC_CFG1 0xFF73 #define LDO_VCC_REF_TUNE_MASK 0x30 #define LDO_VCC_REF_1V2 0x20 @@ -741,6 +761,8 @@ #define RTS5260_AUTOLOAD_CFG4 0xFF7F #define RTS5260_MIMO_DISABLE 0x8A +/*RTS5261*/ +#define RTS5261_AUX_CLK_16M_EN (1 << 5) #define RTS5260_REG_GPIO_CTL0 0xFC1A #define RTS5260_REG_GPIO_MASK 0x01 @@ -1191,6 +1213,7 @@ struct rtsx_pcr { #define EXTRA_CAPS_MMC_HS200 (1 << 4) #define EXTRA_CAPS_MMC_8BIT (1 << 5) #define EXTRA_CAPS_NO_MMC (1 << 7) +#define EXTRA_CAPS_SD_EXPRESS (1 << 8) u32 extra_caps; #define IC_VER_A 0 -- 2.17.1