On 16/10/20 2:11 am, Michael Walle wrote:
> On rare occations there is the following error:
>
> mmc0: Tuning timeout, falling back to fixed sampling clock
>
> There are SD cards which takes a significant longer time to reply to the
> first CMD19 command. The eSDHC takes the data timeout value into account
> during the tuning period. The SDHCI core doesn't explicitly set this
> timeout for the tuning procedure. Thus on the slow cards, there might be
> a spurious "Buffer Read Ready" interrupt, which in turn triggers a wrong
> sequence of events. In the end this will lead to an unsuccessful tuning
> procedure and to the above error.
>
> To workaround this, set the timeout to the maximum value (which is the
> best we can do) and the SDHCI core will take care of the proper timeout
> handling.
>
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-of-esdhc.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
> index 0b45eff6fed4..baf7801a1804 100644
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -1052,6 +1052,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> esdhc_tuning_block_enable(host, true);
>
> + /*
> + * The eSDHC controller takes the data timeout value into account
> + * during tuning. If the SD card is too slow sending the response, the
> + * timer will expire and a "Buffer Read Ready" interrupt without data
> + * is triggered. This leads to tuning errors.
> + *
> + * Just set the timeout to the maximum value because the core will
> + * already take care of it in sdhci_send_tuning().
> + */
> + sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
> +
> hs400_tuning = host->flags & SDHCI_HS400_TUNING;
>
> do {
>
