Change in v4: 1)drop "vmmc" and "vqmmc" desciption in mtk-sd.yaml 2)add vmmq/vqmmc supplies and the pinctrls to required properties 3)change dbg level and exit this function 4)use devm_clk_get_optional instead of devm_clk_get function 5)remove else branch for sys_clk_cg Change in v3: 1)change maintainers name in mtk-sd.yaml 2)change "compatible" properties to enum type and sort it 3)drop these properties: "reg" and "interrupts" 4)add "maxItems" constraints on these properties: "vmmc-supply", "vqmmc-supply", "assigned-clocks", "assigned-clock-parents" 5)add "minimum" and "maximum" constraints on these properties: "mediatek,hs400-cmd-int-delay", "mediatek,latch-ck", "hs400-ds-delay", "mediatek,hs200-cmd-int-delay" Change in v2: Convert mtk-sd to json-schema Wenbin Mei (4): dt-bindings: mmc: Convert mtk-sd to json-schema mmc: dt-bindings: add support for MT8192 SoC arm64: dts: mt8192: add mmc device node mmc: mediatek: Add subsys clock control for MT8192 msdc --- This patch depends on [v4,1/3] arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile [v3,1/9] dt-bindings: ARM: Mediatek: Document bindings for MT8192 BSP [v3,6/9] clk: mediatek: Add dt-bindings for MT8192 clocks [v3,9/9] clk: mediatek: Add MT8192 clock support [v3,1/3] dt-bindings: pinctrl: mt8192: add pinctrl file [v3,2/3] dt-bindings: pinctrl: mt8192: add binding document [v3,3/3] pinctrl: add pinctrl driver on mt8192 [v2,1/4] soc: mediatek: pwrap: use BIT() macro [v2,2/4] soc: mediatek: pwrap: add arbiter capability [v2,3/4] dt-bindings: mediatek: add compatible for MT6873/8192 pwrap [v2,4/4] soc: mediatek: pwrap: add pwrap driver for MT6873/8192 SoCs [2/8] dt-bindings: mfd: Add compatible for the MediaTek MT6359 PMIC [3/8] dt-bindings: regulator: Add document for MT6359 regulator [4/8] mfd: Add support for the MediaTek MT6359 PMIC [5/8] regulator: mt6359: Add support for MT6359 regulator [7/8] regulator: mt6359: Add support for MT6359P regulator [8/8] arm64: dts: mt6359: add PMIC MT6359 related nodes Please also accept this patch together with [1][2][3][4][5] to avoid build and dt binding check error. [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=332621 [2] https://patchwork.kernel.org/project/linux-mediatek/list/?series=342593 [3] https://patchwork.kernel.org/project/linux-mediatek/list/?series=330017 [4] https://patchwork.kernel.org/project/linux-mediatek/list/?series=322937 [5] https://patchwork.kernel.org/project/linux-mediatek/list/?series=323171 --- .../devicetree/bindings/mmc/mtk-sd.txt | 75 -------- .../devicetree/bindings/mmc/mtk-sd.yaml | 174 ++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8192-evb.dts | 89 +++++++++ arch/arm64/boot/dts/mediatek/mt8192.dtsi | 34 ++++ drivers/mmc/host/mtk-sd.c | 80 ++++++-- 5 files changed, 359 insertions(+), 93 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.txt create mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.yaml -- 2.18.0
