According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffixes to all GPIO hog nodes.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0d1088dcaa02..fa7a041ffcfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -229,28 +229,28 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
- usb-emulation {
+ usb-emulation-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb-emulation";
};
- usb-mode1 {
+ usb-mode1-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode1";
};
- usb-pwr {
+ usb-pwr-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
output-high;
line-name = "usb-pwr-ctrl-en-n";
};
- usb-mode2 {
+ usb-mode2-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
--
2.17.1
