On Tue, 25 Aug 2020 at 10:14, Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx> wrote: > > The patch adds eMMC support for Sparx5, by adding a driver for the SoC > SDHCI controller, DT configuration and DT binding documentation. > > Changes in v5: > - DT+yaml: Change (mmc|sdhci)@600800000 to mmc0@600800000 > - Add missing "static" attribute to probe function > - Drop MMC_SDHCI_IO_ACCESSORS, as it is not required (anymore) > > Changes in v4: > - Disable clock if sdhci_add_host() fails > - Remove dev_err if sdhci_add_host() fails > > Changes in v3: > - Add dt-bindings for property "microchip,clock-delay" > - Enforce "microchip,clock-delay" valid range in driver > - Removed a noisy pr_debug() in sdhci_sparx5_adma_write_desc() > > Changes in v2: > - Changes in driver as per review comments > - Drop debug code > - Drop sysfs code > - use usleep_range() > - use mmc_hostname() in pr_debug() > - Remove deactivated code > - Minor cosmetics > > Lars Povlsen (3): > dt-bindings: mmc: Add Sparx5 SDHCI controller bindings > sdhci: sparx5: Add Sparx5 SoC eMMC driver > arm64: dts: sparx5: Add Sparx5 eMMC support > > .../mmc/microchip,dw-sparx5-sdhci.yaml | 65 +++++ > arch/arm64/boot/dts/microchip/sparx5.dtsi | 24 ++ > .../boot/dts/microchip/sparx5_pcb125.dts | 23 ++ > .../boot/dts/microchip/sparx5_pcb134_emmc.dts | 23 ++ > .../boot/dts/microchip/sparx5_pcb135_emmc.dts | 23 ++ > drivers/mmc/host/Kconfig | 12 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-of-sparx5.c | 269 ++++++++++++++++++ > 8 files changed, 440 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml > create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c > For some reason, patchwork doesn't seem to accept your patches. Can you please have a look to figure it out, at least until next time. In this case, I picked them from the emails, so patch 1 and patch2 applied for next, thanks! Kind regards Uffe
