On 9/06/20 1:20 pm, Lars Povlsen wrote: > This adds the eMMC driver for the Sparx5 SoC. It is based upon the > designware IP, but requires some extra initialization and quirks. > --- > drivers/mmc/host/Kconfig | 13 ++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-of-sparx5.c | 274 +++++++++++++++++++++++++++++ > 3 files changed, 288 insertions(+) > create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index eb85237bf2d63..32dc3ced8529d 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -213,6 +213,19 @@ config MMC_SDHCI_OF_DWCMSHC > If you have a controller with this interface, say Y or M here. > If unsure, say N. > > +config MMC_SDHCI_OF_SPARX5 > + tristate "SDHCI OF support for the MCHP Sparx5 SoC" > + depends on MMC_SDHCI_PLTFM > + depends on ARCH_SPARX5 > + select MMC_SDHCI_IO_ACCESSORS > + help > + This selects the Secure Digital Host Controller Interface (SDHCI) > + found in the MCHP Sparx5 SoC. > + > + If you have a Sparx5 SoC with this interface, say Y or M here. > + > + If unsure, say N. > + > config MMC_SDHCI_CADENCE > tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller" > depends on MMC_SDHCI_PLTFM > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 4d5bcb0144a0a..4a57c4bf18a2e 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -92,6 +92,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o > obj-$(CONFIG_MMC_SDHCI_OF_ASPEED) += sdhci-of-aspeed.o > obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o > obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o > +obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o > obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o > obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o > obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o > diff --git a/drivers/mmc/host/sdhci-of-sparx5.c b/drivers/mmc/host/sdhci-of-sparx5.c > new file mode 100644 > index 0000000000000..1ec40bb27e06d > --- /dev/null > +++ b/drivers/mmc/host/sdhci-of-sparx5.c > @@ -0,1 +1,274 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * drivers/mmc/host/sdhci-of-sparx5.c > + * > + * MCHP Sparx5 SoC Secure Digital Host Controller Interface. > + * > + * Copyright (c) 2019 Microchip Inc. > + * > + * Author: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx> > + */ > + > +#include <linux/sizes.h> > +#include <linux/delay.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/of_device.h> > +#include <linux/mfd/syscon.h> > +#include <linux/dma-mapping.h> > + > +#include "sdhci-pltfm.h" > + > +#define CPU_REGS_GENERAL_CTRL (0x22 * 4) > +#define MSHC_DLY_CC_MASK GENMASK(16, 13) > +#define MSHC_DLY_CC_SHIFT 13 > +#define MSHC_DLY_CC_MAX 15 > + > +#define CPU_REGS_PROC_CTRL (0x2C * 4) > +#define ACP_CACHE_FORCE_ENA BIT(4) > +#define ACP_AWCACHE BIT(3) > +#define ACP_ARCACHE BIT(2) > +#define ACP_CACHE_MASK (ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE) > + > +#define MSHC2_VERSION 0x500 /* Off 0x140, reg 0x0 */ > +#define MSHC2_TYPE 0x504 /* Off 0x140, reg 0x1 */ > +#define MSHC2_EMMC_CTRL 0x52c /* Off 0x140, reg 0xB */ > +#define MSHC2_EMMC_CTRL_EMMC_RST_N BIT(2) > +#define MSHC2_EMMC_CTRL_IS_EMMC BIT(0) > + > +struct sdhci_sparx5_data { > + struct sdhci_host *host; > + struct regmap *cpu_ctrl; > + int delay_clock; > +}; > + > +#define BOUNDARY_OK(addr, len) \ > + ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1))) > + > +/* > + * If DMA addr spans 128MB boundary, we split the DMA transfer into two > + * so that each DMA transfer doesn't exceed the boundary. > + */ > +static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc, > + dma_addr_t addr, int len, > + unsigned int cmd) > +{ > + int tmplen, offset; > + > + pr_debug("%s: write_desc: cmd %02x: len %d, offset 0x%0llx\n", > + mmc_hostname(host->mmc), cmd, len, addr); > + > + if (likely(!len || BOUNDARY_OK(addr, len))) { > + sdhci_adma_write_desc(host, desc, addr, len, cmd); > + return; > + } > + > + pr_debug("%s: write_desc: splitting dma len %d, offset 0x%0llx\n", > + mmc_hostname(host->mmc), len, addr); > + > + offset = addr & (SZ_128M - 1); > + tmplen = SZ_128M - offset; > + sdhci_adma_write_desc(host, desc, addr, tmplen, cmd); > + > + addr += tmplen; > + len -= tmplen; > + sdhci_adma_write_desc(host, desc, addr, len, cmd); > +} > + > +static void sparx5_set_cacheable(struct sdhci_host *host, u32 value) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host); > + > + pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value); > + > + /* Update ACP caching attributes in HW */ > + regmap_update_bits(sdhci_sparx5->cpu_ctrl, > + CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value); > +} > + > +static void sparx5_set_delay(struct sdhci_host *host, u8 value) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host); > + > + pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value); > + > + /* Update DLY_CC in HW */ > + regmap_update_bits(sdhci_sparx5->cpu_ctrl, > + CPU_REGS_GENERAL_CTRL, > + MSHC_DLY_CC_MASK, > + (value << MSHC_DLY_CC_SHIFT)); > +} > + > +static void sdhci_sparx5_set_emmc(struct sdhci_host *host) > +{ > + if (!mmc_card_is_removable(host->mmc)) { > + u8 value; > + > + value = sdhci_readb(host, MSHC2_EMMC_CTRL); > + if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) { > + value |= MSHC2_EMMC_CTRL_IS_EMMC; > + pr_debug("%s: Set EMMC_CTRL: 0x%08x\n", > + mmc_hostname(host->mmc), value); > + sdhci_writeb(host, value, MSHC2_EMMC_CTRL); > + } > + } > +} > + > +static void sdhci_sparx5_reset_emmc(struct sdhci_host *host) > +{ > + u8 value; > + > + pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc)); > + value = sdhci_readb(host, MSHC2_EMMC_CTRL) & > + ~MSHC2_EMMC_CTRL_EMMC_RST_N; > + sdhci_writeb(host, value, MSHC2_EMMC_CTRL); > + /* For eMMC, minimum is 1us but give it 10us for good measure */ > + usleep_range(10, 20); > + sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N, > + MSHC2_EMMC_CTRL); > + /* For eMMC, minimum is 200us but give it 300us for good measure */ > + usleep_range(300, 400); > +} > + > +static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask) > +{ > + pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask); > + > + sdhci_reset(host, mask); > + > + /* Be sure CARD_IS_EMMC stays set */ > + sdhci_sparx5_set_emmc(host); > +} > + > +static const struct sdhci_ops sdhci_sparx5_ops = { > + .set_clock = sdhci_set_clock, > + .set_bus_width = sdhci_set_bus_width, > + .set_uhs_signaling = sdhci_set_uhs_signaling, > + .get_max_clock = sdhci_pltfm_clk_get_max_clock, > + .reset = sdhci_sparx5_reset, > + .adma_write_desc = sdhci_sparx5_adma_write_desc, > +}; > + > +static const struct sdhci_pltfm_data sdhci_sparx5_pdata = { > + .quirks = 0, > + .quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */ > + SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */ > + .ops = &sdhci_sparx5_ops, > +}; > + > +int sdhci_sparx5_probe(struct platform_device *pdev) > +{ > + int ret; > + const char *syscon = "microchip,sparx5-cpu-syscon"; > + struct sdhci_host *host; > + struct sdhci_pltfm_host *pltfm_host; > + struct sdhci_sparx5_data *sdhci_sparx5; > + struct device_node *np = pdev->dev.of_node; > + u32 value; > + u32 extra; > + > + host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata, > + sizeof(*sdhci_sparx5)); > + > + if (IS_ERR(host)) > + return PTR_ERR(host); > + > + /* > + * extra adma table cnt for cross 128M boundary handling. > + */ > + extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M); > + if (extra > SDHCI_MAX_SEGS) > + extra = SDHCI_MAX_SEGS; > + host->adma_table_cnt += extra; > + > + pltfm_host = sdhci_priv(host); > + sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host); > + sdhci_sparx5->host = host; > + > + pltfm_host->clk = devm_clk_get(&pdev->dev, "core"); > + if (IS_ERR(pltfm_host->clk)) { > + ret = PTR_ERR(pltfm_host->clk); > + dev_err(&pdev->dev, "failed to get core clk: %d\n", ret); > + goto free_pltfm; > + } > + ret = clk_prepare_enable(pltfm_host->clk); > + if (ret) > + goto free_pltfm; > + > + if (!of_property_read_u32(np, "microchip,clock-delay", &value) && > + value <= MSHC_DLY_CC_MAX) > + sdhci_sparx5->delay_clock = value; > + else > + sdhci_sparx5->delay_clock = -1; /* Autotune */ > + > + sdhci_get_of_property(pdev); > + > + ret = mmc_of_parse(host->mmc); > + if (ret) > + goto err_clk; > + > + sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon); > + if (IS_ERR(sdhci_sparx5->cpu_ctrl)) { > + dev_err(&pdev->dev, "No CPU syscon regmap !\n"); > + ret = PTR_ERR(sdhci_sparx5->cpu_ctrl); > + goto err_clk; > + } > + > + if (sdhci_sparx5->delay_clock >= 0) > + sparx5_set_delay(host, sdhci_sparx5->delay_clock); > + > + if (!mmc_card_is_removable(host->mmc)) { > + /* Do a HW reset of eMMC card */ > + sdhci_sparx5_reset_emmc(host); > + /* Update EMMC_CTRL */ > + sdhci_sparx5_set_emmc(host); > + /* If eMMC, disable SD and SDIO */ > + host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD); > + } > + > + ret = sdhci_add_host(host); > + if (ret) > + dev_err(&pdev->dev, "sdhci_add_host() failed (%d)\n", ret); Shouldn't this goto err_clk; Also, the error message is not really needed if ret == -EPROBE_DEFER > + > + /* Set AXI bus master to use un-cached access (for DMA) */ > + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) && > + IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT)) > + sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA); > + > + pr_debug("%s: SDHC version: 0x%08x\n", > + mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION)); > + pr_debug("%s: SDHC type: 0x%08x\n", > + mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE)); > + > + return ret; > + > +err_clk: > + clk_disable_unprepare(pltfm_host->clk); > +free_pltfm: > + sdhci_pltfm_free(pdev); > + return ret; > +} > + > +static const struct of_device_id sdhci_sparx5_of_match[] = { > + { .compatible = "microchip,dw-sparx5-sdhci" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match); > + > +static struct platform_driver sdhci_sparx5_driver = { > + .driver = { > + .name = "sdhci-sparx5", > + .of_match_table = sdhci_sparx5_of_match, > + .pm = &sdhci_pltfm_pmops, > + }, > + .probe = sdhci_sparx5_probe, > + .remove = sdhci_pltfm_unregister, > +}; > + > +module_platform_driver(sdhci_sparx5_driver); > + > +MODULE_DESCRIPTION("Sparx5 SDHCI OF driver"); > +MODULE_AUTHOR("Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>"); > +MODULE_LICENSE("GPL v2"); > -- > Cc: Microchip Linux Driver Support <UNGLinuxDriver@xxxxxxxxxxxxx> > Cc: linux-mmc@xxxxxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx >