When enabling calibration at reset, the CALCR register was completely
rewritten. This may cause certain bits being deleted unintentedly.
Fix by issuing a read-modify-write operation.
Fixes: 727d836a375a ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset")
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-at91.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 25f4e0f4f53b..1ece2c50042c 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -121,9 +121,12 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
|| mmc_gpio_get_cd(host->mmc) >= 0)
sdhci_at91_set_force_card_detect(host);
- if (priv->cal_always_on && (mask & SDHCI_RESET_ALL))
- sdhci_writel(host, SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
+ if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) {
+ u32 calcr = sdhci_readl(host, SDMMC_CALCR);
+
+ sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
SDMMC_CALCR);
+ }
}
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
--
2.25.1
