On Thu, May 07, 2020 at 01:32:08PM +0530, Sarthak Garg wrote: > Add information regarding DLL register properties for getting target > specific configurations. These DLL register settings may vary from > target to target. > > Also new compatible string value for sm8250 target. > > Signed-off-by: Sarthak Garg <sartgarg@xxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > index 5445931..b8e1d2b 100644 > --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > @@ -17,6 +17,7 @@ Required properties: > "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" > "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" > "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" > + "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5" > "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" > "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" > "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; > @@ -46,6 +47,13 @@ Required properties: > "cal" - reference clock for RCLK delay calibration (optional) > "sleep" - sleep clock for RCLK delay calibration (optional) > > +- qcom,ddr-config: Certain chipsets and platforms require particular settings > + for the DDR_CONFIG register. Use this field to specify the register > + value as per the Hardware Programming Guide. > + > +- qcom,dll-config: Chipset and Platform specific value. Use this field to > + specify the DLL_CONFIG register value as per Hardware Programming Guide. Board specific or SoC specific? If the latter, imply this from the compatible string.
