MSM sd host controller is capable of HW busy detection of device busy signaling over DAT0 line. And it requires the R1B response for commands that have this response associated with them. So set the below two host capabilities for qcom SDHC. - MMC_CAP_WAIT_WHILE_BUSY - MMC_CAP_NEED_RSP_BUSY Cc: <stable@xxxxxxxxxxxxxxx> # v4.19+ Signed-off-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> --- drivers/mmc/host/sdhci-msm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 09ff731..d826e9b 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -2087,6 +2087,9 @@ static int sdhci_msm_probe(struct platform_device *pdev) goto clk_disable; } + msm_host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; + msm_host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY; + pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
