On Wed, 15 Apr 2020 at 11:35, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 8/04/20 10:21 am, Masahiro Yamada wrote:
> > Use FIELD_GET and FIELD_PREP to get access to the register fields.
> > Delete the shift macros. I used GENMASK() for touched macros.
>
> That has the side-effect of changing the constants to 64-bit on 64-bit
> platforms, which needs to be mentioned in the commit message.
>
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
>
> Apart from above:
>
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Applied for next, by amending the changelog according to the
suggestion by Adrian.
Kind regards
Uffe
>
> > ---
> >
> > drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++-
> > drivers/mmc/host/sdhci-of-at91.c | 5 +++--
> > drivers/mmc/host/sdhci-pci-core.c | 8 ++------
> > drivers/mmc/host/sdhci.c | 19 +++++++------------
> > drivers/mmc/host/sdhci.h | 17 ++++++-----------
> > 5 files changed, 21 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> > index 5ec8e4bf1ac7..38cd83118082 100644
> > --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> > @@ -8,6 +8,7 @@
> > * Author: Wolfram Sang <kernel@xxxxxxxxxxxxxx>
> > */
> >
> > +#include <linux/bitfield.h>
> > #include <linux/io.h>
> > #include <linux/iopoll.h>
> > #include <linux/delay.h>
> > @@ -399,7 +400,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
> > val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
> > | SDHCI_SUPPORT_SDR50
> > | SDHCI_USE_SDR50_TUNING
> > - | (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
> > + | FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
> > + SDHCI_TUNING_MODE_3);
> >
> > if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
> > val |= SDHCI_SUPPORT_HS400;
> > diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> > index c79bff5e2280..25f4e0f4f53b 100644
> > --- a/drivers/mmc/host/sdhci-of-at91.c
> > +++ b/drivers/mmc/host/sdhci-of-at91.c
> > @@ -6,6 +6,7 @@
> > * 2015 Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
> > */
> >
> > +#include <linux/bitfield.h>
> > #include <linux/clk.h>
> > #include <linux/delay.h>
> > #include <linux/err.h>
> > @@ -179,9 +180,9 @@ static int sdhci_at91_set_clks_presets(struct device *dev)
> > clk_mul = gck_rate / clk_base_rate - 1;
> >
> > caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK;
> > - caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK;
> > + caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base);
> > caps1 &= ~SDHCI_CLOCK_MUL_MASK;
> > - caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK;
> > + caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul);
> > /* Set capabilities in r/w mode. */
> > writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
> > writel(caps0, host->ioaddr + SDHCI_CAPABILITIES);
> > diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> > index 525de2454a4d..a98c9476bfc8 100644
> > --- a/drivers/mmc/host/sdhci-pci-core.c
> > +++ b/drivers/mmc/host/sdhci-pci-core.c
> > @@ -249,12 +249,8 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
> > static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
> > {
> > slot->host->caps =
> > - ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
> > - & SDHCI_TIMEOUT_CLK_MASK) |
> > -
> > - ((0x21 << SDHCI_CLOCK_BASE_SHIFT)
> > - & SDHCI_CLOCK_BASE_MASK) |
> > -
> > + FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) |
> > + FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) |
> > SDHCI_TIMEOUT_CLK_UNIT |
> > SDHCI_CAN_VDD_330 |
> > SDHCI_CAN_DO_HISPD |
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index 3f716466fcfd..344a7e0e33fe 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -4117,11 +4117,9 @@ int sdhci_setup_host(struct sdhci_host *host)
> > }
> >
> > if (host->version >= SDHCI_SPEC_300)
> > - host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK)
> > - >> SDHCI_CLOCK_BASE_SHIFT;
> > + host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps);
> > else
> > - host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK)
> > - >> SDHCI_CLOCK_BASE_SHIFT;
> > + host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps);
> >
> > host->max_clk *= 1000000;
> > if (host->max_clk == 0 || host->quirks &
> > @@ -4139,8 +4137,7 @@ int sdhci_setup_host(struct sdhci_host *host)
> > * In case of Host Controller v3.00, find out whether clock
> > * multiplier is supported.
> > */
> > - host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >>
> > - SDHCI_CLOCK_MUL_SHIFT;
> > + host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1);
> >
> > /*
> > * In case the value in Clock Multiplier is 0, then programmable
> > @@ -4173,8 +4170,7 @@ int sdhci_setup_host(struct sdhci_host *host)
> > mmc->f_max = max_clk;
> >
> > if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
> > - host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >>
> > - SDHCI_TIMEOUT_CLK_SHIFT;
> > + host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps);
> >
> > if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
> > host->timeout_clk *= 1000;
> > @@ -4326,8 +4322,8 @@ int sdhci_setup_host(struct sdhci_host *host)
> > mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
> >
> > /* Initial value for re-tuning timer count */
> > - host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
> > - SDHCI_RETUNING_TIMER_COUNT_SHIFT;
> > + host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK,
> > + host->caps1);
> >
> > /*
> > * In case Re-tuning Timer is not disabled, the actual value of
> > @@ -4337,8 +4333,7 @@ int sdhci_setup_host(struct sdhci_host *host)
> > host->tuning_count = 1 << (host->tuning_count - 1);
> >
> > /* Re-tuning mode supported by the Host Controller */
> > - host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >>
> > - SDHCI_RETUNING_MODE_SHIFT;
> > + host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1);
> >
> > ocr_avail = 0;
> >
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index b786b68e0302..d7f1441b0fc3 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -200,12 +200,10 @@
> > #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
> >
> > #define SDHCI_CAPABILITIES 0x40
> > -#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
> > -#define SDHCI_TIMEOUT_CLK_SHIFT 0
> > +#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0)
> > #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
> > -#define SDHCI_CLOCK_BASE_MASK 0x00003F00
> > -#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
> > -#define SDHCI_CLOCK_BASE_SHIFT 8
> > +#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8)
> > +#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8)
> > #define SDHCI_MAX_BLOCK_MASK 0x00030000
> > #define SDHCI_MAX_BLOCK_SHIFT 16
> > #define SDHCI_CAN_DO_8BIT 0x00040000
> > @@ -227,13 +225,10 @@
> > #define SDHCI_DRIVER_TYPE_A 0x00000010
> > #define SDHCI_DRIVER_TYPE_C 0x00000020
> > #define SDHCI_DRIVER_TYPE_D 0x00000040
> > -#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
> > -#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
> > +#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
> > #define SDHCI_USE_SDR50_TUNING 0x00002000
> > -#define SDHCI_RETUNING_MODE_MASK 0x0000C000
> > -#define SDHCI_RETUNING_MODE_SHIFT 14
> > -#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
> > -#define SDHCI_CLOCK_MUL_SHIFT 16
> > +#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
> > +#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
> > #define SDHCI_CAN_DO_ADMA3 0x08000000
> > #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
> >
> >
>
