On 3/6/20 6:37 AM, Ulf Hansson wrote:
On Wed, 4 Mar 2020 at 18:09, Dmitry Osipenko <digetx@xxxxxxxxx> wrote:
04.03.2020 19:36, Ulf Hansson пишет:
On Tue, 25 Feb 2020 at 01:20, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
On 2/24/20 4:18 PM, Dmitry Osipenko wrote:
All NVIDIA Tegra devices use a special partition table format for the
internal storage partitioning. Most of Tegra devices have GPT partition
in addition to TegraPT, but some older Android consumer-grade devices do
not or GPT is placed in a wrong sector, and thus, the TegraPT is needed
in order to support these devices properly in the upstream kernel. This
patch adds support for NVIDIA Tegra Partition Table format that is used
at least by all NVIDIA Tegra20 and Tegra30 devices.
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
+static void __init tegra_boot_config_table_init(void)
+{
+ void __iomem *bct_base;
+ u16 pt_addr, pt_size;
+
+ bct_base = IO_ADDRESS(TEGRA_IRAM_BASE) + TEGRA_IRAM_BCT_OFFSET;
This shouldn't be hard-coded. IIRC, the boot ROM writes a BIT (Boot
Information Table) to a fixed location in IRAM, and there's some value
in the BIT that points to where the BCT is in IRAM. In practice, it
might work out that the BCT is always at the same place in IRAM, but
this certainly isn't guaranteed. I think there's code in U-Boot which
extracts the BCT location from the BIT? Yes, see
arch/arm/mach-tegra/ap.c:get_odmdata().
So, have you considered using the command line partition option,
rather than adding yet another partition scheme to the kernel?
In principle, you would let the boot loader scan for the partitions,
likely from machine specific code in U-boot. Then you append these to
the kernel command line and let block/partitions/cmdline.c scan for
it.
The bootloader is usually locked-down on a consumer Tegra machines (it's
signed / encrypted).
Right, you are you talking about this from a developer point of view,
not from an end product user?
I mean, for sure you can upgrade the bootloader on Nvidia products? No, really?
For developer-oriented products like Jetson developer kits, you can
upgrade the bootloader, and luckily they haven't used this partition
table format for many versions.
However, commercial Android products typically have secure boot enabled,
so you can't replace the bootloader unless you know the secure boot
keys, which only the manufacturer knows. Dmitry is working on
re-purposing such products.
