RE: [PATCH v3 12/14] mmc: sdhci-esdhc-imx: restore pin state when resume back

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Hunter, Adrian <adrian.hunter@xxxxxxxxx>
> Sent: 2020年2月19日 15:29
> To: BOUGH CHEN <haibo.chen@xxxxxxx>; ulf.hansson@xxxxxxxxxx;
> linux-mmc@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>; linus.walleij@xxxxxxxxxx
> Subject: RE: [PATCH v3 12/14] mmc: sdhci-esdhc-imx: restore pin state when
> resume back
> 
> 
> 
> > -----Original Message-----
> > From: BOUGH CHEN <haibo.chen@xxxxxxx>
> > Sent: Wednesday, February 19, 2020 9:16 AM
> > To: Hunter, Adrian <adrian.hunter@xxxxxxxxx>; ulf.hansson@xxxxxxxxxx;
> > linux-mmc@xxxxxxxxxxxxxxx
> > Cc: dl-linux-imx <linux-imx@xxxxxxx>; linus.walleij@xxxxxxxxxx
> > Subject: RE: [PATCH v3 12/14] mmc: sdhci-esdhc-imx: restore pin state
> > when resume back
> >
> > > -----Original Message-----
> > > From: linux-mmc-owner@xxxxxxxxxxxxxxx
> > > <linux-mmc-owner@xxxxxxxxxxxxxxx> On Behalf Of Adrian Hunter
> > > Sent: 2020年2月18日 15:58
> > > To: BOUGH CHEN <haibo.chen@xxxxxxx>; ulf.hansson@xxxxxxxxxx;
> > > linux-mmc@xxxxxxxxxxxxxxx
> > > Cc: dl-linux-imx <linux-imx@xxxxxxx>; linus.walleij@xxxxxxxxxx
> > > Subject: Re: [PATCH v3 12/14] mmc: sdhci-esdhc-imx: restore pin
> > > state when resume back
> > >
> > > On 10/02/20 10:49 am, haibo.chen@xxxxxxx wrote:
> > > > From: Haibo Chen <haibo.chen@xxxxxxx>
> > > >
> > > > In some low power mode, SoC will lose the pin state, so need to
> > > > restore the pin state when resume back.
> > > >
> > > > Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
> > > > ---
> > > >  drivers/mmc/host/sdhci-esdhc-imx.c | 12 +++++++++++-
> > > >  1 file changed, 11 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > b/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > index 106097cbd0d4..dedc067cd0dd 100644
> > > > --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > @@ -1717,7 +1717,13 @@ static int sdhci_esdhc_suspend(struct
> > > > device
> > > *dev)
> > > >  	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
> > > >  		mmc_retune_needed(host->mmc);
> > > >
> > > > -	return sdhci_suspend_host(host);
> > > > +	ret = sdhci_suspend_host(host);
> > > > +	if (!ret)
> > > > +		if (pinctrl_pm_select_sleep_state(dev))
> > > > +			dev_warn(mmc_dev(host->mmc),
> > > > +			 "%s, failed to select sleep pin state!\n", __func__);
> > >
> > > It looks to me like pinctrl_pm_select_sleep_state() prints an error
> > > anyway if it fails, so the warning here is redundant.
> >
> > Okay, thanks for point out that!
> >
> > >
> > > Also a comment about why it is OK to ignore an error could be added.
> >
> > Yes, I will add a comment like below, should it be okay?
> 
> I meant why it is ok to ignore the pinctrl error

Okay, I know your point. 
So I think this patch can change like below:

index 786305309eb0..b38b9d7f0a0d 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1731,7 +1731,11 @@ static int sdhci_esdhc_suspend(struct device *dev)
        if (host->tuning_mode != SDHCI_TUNING_MODE_3)
                mmc_retune_needed(host->mmc);

-       return sdhci_suspend_host(host);
+       ret = sdhci_suspend_host(host);
+       if (!ret)
+               return pinctrl_pm_select_sleep_state(dev);
+
+       return ret;
 }

 static int sdhci_esdhc_resume(struct device *dev)
@@ -1739,6 +1743,10 @@ static int sdhci_esdhc_resume(struct device *dev)
        struct sdhci_host *host = dev_get_drvdata(dev);
        int ret;

+       ret = pinctrl_pm_select_default_state(dev);
+       if (ret)
+               return ret;
+
        /* re-initialize hw state in case it's lost in low power mode */
        sdhci_esdhc_imx_hwinit(host);

> 
> >
> > /*
> >  * here ignore the error return, because current API
> > sdhci_suspend_host always return zero,
> >  * When the API sdhci_suspend_host change the return policy, need to
> > change at here too.
> >  */
> >
> > Best Regards
> > Bough chen
> > >
> > > > +
> > > > +	return ret;
> > > >  }
> > > >
> > > >  static int sdhci_esdhc_resume(struct device *dev) @@ -1725,6
> > > > +1731,10 @@ static int sdhci_esdhc_resume(struct device *dev)
> > > >  	struct sdhci_host *host = dev_get_drvdata(dev);
> > > >  	int ret;
> > > >
> > > > +	if (pinctrl_pm_select_default_state(dev))
> > > > +		dev_warn(mmc_dev(host->mmc),
> > > > +		 "%s, failed to select default pin state!\n", __func__);
> > >
> > > Same as above
> > >
> > > > +
> > > >  	/* re-initialize hw state in case it's lost in low power mode */
> > > >  	sdhci_esdhc_imx_hwinit(host);
> > > >
> > > >





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux