Re: [PATCH V1] dt-bindings: mmc: sdhci-msm: Add CQE reg map

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2/11/2020 10:12 PM, Doug Anderson wrote:
Hi,

On Tue, Feb 11, 2020 at 7:29 AM Veerabhadrarao Badiganti
<vbadigan@xxxxxxxxxxxxxx> wrote:
CQE feature has been enabled on sdhci-msm. Add CQE reg map
that needs to be supplied for supporting CQE feature.

Change-Id: I788c4bd5b7cbca16bc1030a410cc5550ed7204e1
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>
---
  Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 5 +++++
  1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 7ee639b..eaa0998 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -27,6 +27,11 @@ Required properties:
  - reg: Base address and length of the register in the following order:
         - Host controller register map (required)
         - SD Core register map (required for msm-v4 and below)
+       - CQE register map (Optional, needed only for eMMC and msm-v4.2 above)
I did a quick search and it appears that SD cards implementing 6.0 of
the spec can also use CQE.  Is that correct?  If so, maybe remove the
part about "eMMC"?
On qcom platforms, only SDHC instance meant for eMMC has the CQE support.
So mentioned that its needed only for eMMC.

Maybe also change "needed" to "useful" to make it clear that this
entry isn't actually required for all msm-v4.2 controllers?
sure.

+- reg-names: When CQE register map is supplied, below reg-names are required
+       - "hc_mem" for Host controller register map
+       - "core_mem" for SD cpre regoster map
s/regoster/register


+       - "cqhci_mem" for CQE register map
I'm at least slightly confused.  You say that reg-names are there only
if CQE register map is supplied.  ...and that requires 4.2 and above.
...but "core_mem" is only there on 4.0 and below.  So there should
never be a "core_mem" entry?
core_mem is present till <v5.0
cqhci_mem is present on >=v4.2
Say, for version v4.2 both are present; .... and for v5.0 only cqhci_mem is present.

Both hc reg-map and core reg-map are being accessed through index.
So no need to list the reg names 'hc_mem' & 'core_mem' in general.

But coming to cqhci reg-map we can't access it with fixed index, since its index varies between 1/2
based on controller version.

So we are accessing it through reg-names. Since reg-names has to be associated with corresponding reg maps, other two reg-names (hc_mem & core_mem) also need to br listed when cqhci_mem is listed.

That is the reason, I mentioned it like these are needed only cqe reg map is supplied.
If it is creating confusion, i will remove that statement.
Trying to specify that sanely in free-form text seems like it's gonna
be hard and not worth it.  You should probably transition to yaml
first?


I will also note that Rob isn't a huge fan of "reg-names".  In a
different conversation I think you mentioned you had a reason for
having it.  I guess just be prepared to defend yourself against Rob if
you feel strongly about keeping reg-names.
Sure. Its the same reason mentioned in above comment.

-Doug



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux