RE: [PATCH 2/3] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Russell,

Recently I got eSDHC ADMA issue on PowerPC T2080 platform. After checking, the issue is related to this patch.
This patch was to make eSDHC DMA SNOOP bit set per dma-coherent. That resolved issue on LX2160A ARM64 platform.
However on T2080, we are facing similar issue again. It didn't have dma-coherent in dts.
Adding dma-coherent in dts, or reverting the patch could resolve the problem.

Would you please help to have a look at it too? Thanks:)

mmc0: ADMA error: 0x02000000
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002002
mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
NET: Registered protocol family 10
mmc0: sdhci: Present:   0x01fd020a | Host ctl: 0x00000038
mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000020b8
mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab:  0x037f100f | Sig enab: 0x037f100b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002002
mmc0: sdhci: Caps:      0x34fa0000 | Caps_1:   0x0000af00
mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x003b3733
mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err:  0x0000000d | ADMA Ptr: 0x00000000f35ad20c
mmc0: sdhci: ============================================
mmc0: sdhci: f35ad200: DMA 0x00000000f3587710, LEN 0x0008, Attr=0x23
mmc0: error -5 whilst initialising SD card

Best regards,
Yangbo Lu


> -----Original Message-----
> From: Russell King <rmk@xxxxxxxxxxxxxxx> On Behalf Of Russell King
> Sent: Sunday, September 22, 2019 6:27 PM
> To: Robin Murphy <robin.murphy@xxxxxxx>; dann frazier
> <dann.frazier@xxxxxxxxxxxxx>; Will Deacon <will.deacon@xxxxxxx>; Nicolin
> Chen <nicoleotsuka@xxxxxxxxx>; Y.b. Lu <yangbo.lu@xxxxxxx>; Christoph
> Hellwig <hch@xxxxxx>
> Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx>; Ulf Hansson
> <ulf.hansson@xxxxxxxxxx>; linux-mmc@xxxxxxxxxxxxxxx
> Subject: [PATCH 2/3] mmc: sdhci-of-esdhc: set DMA snooping based on DMA
> coherence
> 
> We must not unconditionally set the DMA snoop bit; if the DMA API is
> assuming that the device is not DMA coherent, and the device snoops the
> CPU caches, the device can see stale cache lines brought in by
> speculative prefetch.
> 
> This leads to the device seeing stale data, potentially resulting in
> corrupted data transfers.  Commonly, this results in a descriptor fetch
> error such as:
> 
> mmc0: ADMA error
> mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002202
> mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
> mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
> mmc0: sdhci: Present:   0x01f50008 | Host ctl: 0x00000038
> mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
> mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000040d8
> mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
> mmc0: sdhci: Int enab:  0x037f108f | Sig enab: 0x037f108b
> mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
> mmc0: sdhci: Caps:      0x35fa0000 | Caps_1:   0x0000af00
> mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
> mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x001d8a33
> mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
> mmc0: sdhci: Host ctl2: 0x00000000
> mmc0: sdhci: ADMA Err:  0x00000009 | ADMA Ptr: 0x000000236d43820c
> mmc0: sdhci: ============================================
> mmc0: error -5 whilst initialising SD card
> 
> but can lead to other errors, and potentially direct the SDHCI
> controller to read/write data to other memory locations (e.g. if a valid
> descriptor is visible to the device in a stale cache line.)
> 
> Fix this by ensuring that the DMA snoop bit corresponds with the
> behaviour of the DMA API.  Since the driver currently only supports DT,
> use of_dma_is_coherent().  Note that device_get_dma_attr() can not be
> used as that risks re-introducing this bug if/when the driver is
> converted to ACPI.
> 
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-of-esdhc.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c
> b/drivers/mmc/host/sdhci-of-esdhc.c
> index 4dd43b1adf2c..74de5e8c45c8 100644
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -495,7 +495,12 @@ static int esdhc_of_enable_dma(struct sdhci_host
> *host)
>  		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
> 
>  	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
> -	value |= ESDHC_DMA_SNOOP;
> +
> +	if (of_dma_is_coherent(dev->of_node))
> +		value |= ESDHC_DMA_SNOOP;
> +	else
> +		value &= ~ESDHC_DMA_SNOOP;
> +
>  	sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
>  	return 0;
>  }
> --
> 2.7.4





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux