Re: [PATCH v4 03/11] mmc: sdhci: add support for using external DMA devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 08/01/2020 11.29, Baolin Wang wrote:
> Hi Faiz,
> 
> On Wed, Jan 8, 2020 at 5:19 PM Faiz Abbas <faiz_abbas@xxxxxx> wrote:
>>
>> Hi Baolin,
>>
>> On 08/01/20 6:58 am, Baolin Wang wrote:
>>> Hi Faiz,
>>>
>>> On Mon, Jan 6, 2020 at 7:01 PM Faiz Abbas <faiz_abbas@xxxxxx> wrote:
>>>>
>>>> From: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
>>>>
>>>> Some standard SD host controllers can support both external dma
>>>> controllers as well as ADMA/SDMA in which the SD host controller
>>>> acts as DMA master. TI's omap controller is the case as an example.
>>>>
>>>> Currently the generic SDHCI code supports ADMA/SDMA integrated in
>>>> the host controller but does not have any support for external DMA
>>>> controllers implemented using dmaengine, meaning that custom code is
>>>> needed for any systems that use an external DMA controller with SDHCI.
>>>>
>>>> Fixes by Faiz Abbas <faiz_abbas@xxxxxx>:
>>>> 1. Map scatterlists before dmaengine_prep_slave_sg()
>>>> 2. Use dma_async() functions inside of the send_command() path and call
>>>> terminate_sync() in non-atomic context in case of an error.
>>>>
>>>> Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
>>>> Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
>>>> ---
>>>>  drivers/mmc/host/Kconfig |   3 +
>>>>  drivers/mmc/host/sdhci.c | 228 ++++++++++++++++++++++++++++++++++++++-
>>>>  drivers/mmc/host/sdhci.h |   8 ++
>>>>  3 files changed, 237 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>>> index d06b2dfe3c95..adef971582a1 100644
>>>> --- a/drivers/mmc/host/Kconfig
>>>> +++ b/drivers/mmc/host/Kconfig
>>>> @@ -1040,3 +1040,6 @@ config MMC_OWL
>>>>         help
>>>>           This selects support for the SD/MMC Host Controller on
>>>>           Actions Semi Owl SoCs.
>>>> +
>>>> +config MMC_SDHCI_EXTERNAL_DMA
>>>> +       bool
>>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>>> index f6999054abcf..8cc78c76bc3d 100644
>>>> --- a/drivers/mmc/host/sdhci.c
>>>> +++ b/drivers/mmc/host/sdhci.c
>>>> @@ -10,6 +10,7 @@
>>>>   */
>>>>
>>>>  #include <linux/delay.h>
>>>> +#include <linux/dmaengine.h>
>>>>  #include <linux/ktime.h>
>>>>  #include <linux/highmem.h>
>>>>  #include <linux/io.h>
>>>> @@ -1157,6 +1158,188 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>>>>         sdhci_set_block_info(host, data);
>>>>  }
>>>>
>>>> +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
>>>> +
>>>> +static int sdhci_external_dma_init(struct sdhci_host *host)
>>>> +{
>>>> +       int ret = 0;
>>>> +       struct mmc_host *mmc = host->mmc;
>>>> +
>>>> +       host->tx_chan = dma_request_chan(mmc->parent, "tx");
>>>> +       if (IS_ERR(host->tx_chan)) {
>>>> +               ret = PTR_ERR(host->tx_chan);
>>>> +               if (ret != -EPROBE_DEFER)
>>>> +                       pr_warn("Failed to request TX DMA channel.\n");
>>>> +               host->tx_chan = NULL;
>>>> +               return ret;
>>>> +       }
>>>> +
>>>> +       host->rx_chan = dma_request_chan(mmc->parent, "rx");
>>>> +       if (IS_ERR(host->rx_chan)) {
>>>> +               if (host->tx_chan) {
>>>> +                       dma_release_channel(host->tx_chan);
>>>> +                       host->tx_chan = NULL;
>>>> +               }
>>>> +
>>>> +               ret = PTR_ERR(host->rx_chan);
>>>> +               if (ret != -EPROBE_DEFER)
>>>> +                       pr_warn("Failed to request RX DMA channel.\n");
>>>> +               host->rx_chan = NULL;
>>>> +       }
>>>> +
>>>> +       return ret;
>>>> +}
>>>> +
>>>> +static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
>>>> +                                                  struct mmc_data *data)
>>>> +{
>>>> +       return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
>>>> +}
>>>> +
>>>> +static int sdhci_external_dma_setup(struct sdhci_host *host,
>>>> +                                   struct mmc_command *cmd)
>>>> +{
>>>> +       int ret, i;
>>>> +       struct dma_async_tx_descriptor *desc;
>>>> +       struct mmc_data *data = cmd->data;
>>>> +       struct dma_chan *chan;
>>>> +       struct dma_slave_config cfg;
>>>> +       dma_cookie_t cookie;
>>>> +       int sg_cnt;
>>>> +
>>>> +       if (!host->mapbase)
>>>> +               return -EINVAL;
>>>> +
>>>> +       cfg.src_addr = host->mapbase + SDHCI_BUFFER;
>>>> +       cfg.dst_addr = host->mapbase + SDHCI_BUFFER;
>>>> +       cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>>>> +       cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>>>> +       cfg.src_maxburst = data->blksz / 4;
>>>> +       cfg.dst_maxburst = data->blksz / 4;
>>>> +
>>>> +       /* Sanity check: all the SG entries must be aligned by block size. */
>>>> +       for (i = 0; i < data->sg_len; i++) {
>>>> +               if ((data->sg + i)->length % data->blksz)
>>>> +                       return -EINVAL;
>>>> +       }
>>>> +
>>>> +       chan = sdhci_external_dma_channel(host, data);
>>>> +
>>>> +       ret = dmaengine_slave_config(chan, &cfg);
>>>> +       if (ret)
>>>> +               return ret;
>>>> +
>>>> +       sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
>>>> +       if (sg_cnt <= 0)
>>>> +               return -EINVAL;
>>>> +
>>>> +       desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len,
>>>> +                                      mmc_get_dma_dir(data),
>>>> +                                      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>>>> +       if (!desc)
>>>> +               return -EINVAL;
>>>> +
>>>> +       desc->callback = NULL;
>>>> +       desc->callback_param = NULL;
>>>> +
>>>> +       cookie = dmaengine_submit(desc);
>>>> +       if (cookie < 0)
>>>
>>> We usually use the DMA engine standard API: dma_submit_error() to
>>> validate the cookie.
>>>
>>
>> The if condition is doing the same thing as the API. Do we really
>> require it?
> 
> Yes, now it did the same thing. But in future if the DMA engine expand
> the cookie indication, which may break your current condition, but use
> dma_submit_error() is more safe, that will help to cover the internal
> cookie things. So I recommend to use the standard API as far as
> possible.

dma_cookie_t is typedefed to s32 currently, but it could change. The
cookie is for DMA engine internal tracking.
Clients should not use it directly for doing arithmetic on it.

> But if Ulf does not care about this, it's Okay for me too :)
> 

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux