On 27/12/19 5:14 pm, Peter Seiderer wrote: > Fixes: > $ mmc bootpart enable 1 1 /dev/mmcblk1 > [ 2339.324062] mmc1: Controller never released inhibit bit(s). > [ 2339.329808] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== > [ 2339.336339] mmc1: sdhci: Sys addr: 0x11044000 | Version: 0x00000002 > [ 2339.342933] mmc1: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001 > [ 2339.349460] mmc1: sdhci: Argument: 0x03b34801 | Trn mode: 0x00000013 > [ 2339.356048] mmc1: sdhci: Present: 0x01fd8008 | Host ctl: 0x00000031 > [ 2339.362637] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 > [ 2339.369230] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000001f > [ 2339.375943] mmc1: sdhci: Timeout: 0x0000000f | Int stat: 0x00000000 > [ 2339.382542] mmc1: sdhci: Int enab: 0x117f100b | Sig enab: 0x117f100b > [ 2339.389257] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000003 > [ 2339.395856] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x0000a000 > [ 2339.402577] mmc1: sdhci: Cmd: 0x0000061b | Max curr: 0x00ffffff > [ 2339.409291] mmc1: sdhci: Resp[0]: 0x00000800 | Resp[1]: 0xffffffff > [ 2339.415889] mmc1: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00000900 > [ 2339.422602] mmc1: sdhci: Host ctl2: 0x00000008 > [ 2339.427203] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x3fc79208 > [ 2339.433913] mmc1: sdhci: ============================================ > > Suggested-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > Signed-off-by: Peter Seiderer <ps.report@xxxxxxx> > --- > drivers/mmc/host/sdhci.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 275102c0a1bf..011b3d322826 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -1364,8 +1364,8 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) > cmd->opcode == MMC_STOP_TRANSMISSION) > cmd->flags |= MMC_RSP_BUSY; > > - /* Wait max 10 ms */ > - timeout = 10; > + /* Wait max 100 ms */ > + timeout = 100; The inhibits bits should not be set, so I am not sure if this is just papering over the real issue. Did mmc (utils) return an error? Was the eMMC useable after the error? Any chance of getting a register dump without the very long console delays? What device and host controller was it? What kernel version? > > mask = SDHCI_CMD_INHIBIT; > if (sdhci_data_line_cmd(cmd)) >
