For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:
mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]
Cc: stable@xxxxxxxxxxxxxxx
Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode")
Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 275102c0a1bf..0036ddf85674 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3902,11 +3902,9 @@ int sdhci_setup_host(struct sdhci_host *host)
if (host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
else if (host->version >= SDHCI_SPEC_300) {
- if (host->clk_mul) {
- mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+ if (host->clk_mul)
max_clk = host->max_clk * host->clk_mul;
- } else
- mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
} else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
--
2.20.1
