[<PATCH v1> 6/9] mmc: sdhci-msm: Ignore data timeout error for R1B commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>

Ignore data timeout error for R1B commands as there will be no
data associated and the busy timeout value for these commands
could be lager than the maximum timeout value that controller
can handle.

Signed-off-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
Signed-off-by: Bao D. Nguyen <nguyenb@xxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c | 15 +++++++++------
 drivers/mmc/host/sdhci.h |  7 +++++++
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c04e1ac..0a05d74 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2925,12 +2925,6 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		 * above in sdhci_cmd_irq().
 		 */
 		if (data_cmd && (data_cmd->flags & MMC_RSP_BUSY)) {
-			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
-				host->data_cmd = NULL;
-				data_cmd->error = -ETIMEDOUT;
-				__sdhci_finish_mrq(host, data_cmd->mrq);
-				return;
-			}
 			if (intmask & SDHCI_INT_DATA_END) {
 				host->data_cmd = NULL;
 				/*
@@ -2944,6 +2938,15 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 				__sdhci_finish_mrq(host, data_cmd->mrq);
 				return;
 			}
+			if (host->quirks2 &
+				SDHCI_QUIRK2_IGNORE_DATATOUT_FOR_R1BCMD)
+				return;
+			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
+				host->data_cmd = NULL;
+				data_cmd->error = -ETIMEDOUT;
+				__sdhci_finish_mrq(host, data_cmd->mrq);
+				return;
+			}
 		}
 
 		/*
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0ed3e0e..1a88f74 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -482,6 +482,13 @@ struct sdhci_host {
  * block count.
  */
 #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT			(1<<18)
+/*
+ * Ignore data timeout error for R1B commands as there will be no
+ * data associated and the busy timeout value for these commands
+ * could be lager than the maximum timeout value that controller
+ * can handle.
+ */
+#define SDHCI_QUIRK2_IGNORE_DATATOUT_FOR_R1BCMD         (1<<19)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux