Hi Markus, Am Freitag, 15. November 2019, 11:37:58 CET schrieb Markus Reichl: > Am 14.11.19 um 14:10 schrieb Heiko Stuebner: > > $subject is missing the [PATCH] prefix > will fix. no need to resend just for this ... just to keep in mind for future patches ;-) > > Am Montag, 11. November 2019, 10:51:04 CET schrieb Markus Reichl: > >> Working with rootfs on two 128GB mmcs on rk3399-roc-pc. > >> > >> One (mmc name 128G72, one screw hole) works fine in HS400 mode. > >> Other (mmc name DJNB4R, firefly on pcb, two screw holes) gets lots of > >> mmc1: "running CQE recovery", even hangs with damaged fs, > >> when running under heavy load, e.g. compiling kernel. > >> Both run fine with HS200. > >> > >> Disabling CQ with patch mmc: core: Add MMC Command Queue Support kernel parameter [0] did not help. > >> [0] https://gitlab.com/ayufan-repos/rock64/linux-mainline-kernel/commit/54e264154b87dfe32a8359b2726e2d5611adbaf3 > > > > I'm hoping for some input from other people in Cc but your mail headers > > also referenced the drive-impendance series from Christoph [0], which > > it seems we need to poke the phy maintainer again. > > > > Did you check if changing the impedance helped (like the signal dampening > > Philipp described in one of the replies there). > > checked with > > &emmc_phy { > + drive-impedance-ohm = <33>; > > gives no improvement: That is sad ... I guess we really should disable hs400 then ... that may give others more incentive to dive deeper ;-) Heiko > [ 1.688590] mmc1: CQHCI version 5.10 > [ 1.714157] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA > [ 1.797822] mmc1: Command Queue Engine enabled > [ 1.798259] mmc1: new HS400 Enhanced strobe MMC card at address 0001 > [ 1.800034] mmcblk1: mmc1:0001 DJNB4R 116 GiB > [ 1.800643] mmcblk1boot0: mmc1:0001 DJNB4R partition 1 4.00 MiB > [ 1.801408] mmcblk1boot1: mmc1:0001 DJNB4R partition 2 4.00 MiB > [ 1.802886] mmcblk1rpmb: mmc1:0001 DJNB4R partition 3 4.00 MiB, chardev (246:0) > ... > [ 100.118020] mmc1: running CQE recovery > [ 100.120890] ------------[ cut here ]------------ > [ 100.121310] mmc1: cqhci: spurious TCN for tag 2 > [ 100.121802] WARNING: CPU: 0 PID: 232 at drivers/mmc/host/cqhci.c:729 cqhci_irq+0x30c/0x480 > [ 100.122530] Modules linked in: rfkill snd_soc_hdmi_codec dw_hdmi_i2s_audio dw_hdmi_cec rockchipdrm crct10dif_ce analogix_dp dw_mipi_dsi snd_soc_simple_card dw_hdmi cec snd_soc_rockchip_i2s snd_soc_simple_card_utils panfrost snd_soc_rockchip_pcm drm_kms_helper snd_soc_core gpu_sched snd_pcm_dmaengine syscopyarea sysfillrect sysimgblt snd_pcm fb_sys_fops snd_timer snd drm soundcore fusb302 tcpm typec rockchip_saradc drm_panel_orientation_quirks ipv6 > [ 100.126097] CPU: 0 PID: 232 Comm: kworker/0:2H Not tainted 5.4.0-rc7-next-20191112-00007-g2ad177c77749 #44 > [ 100.126946] Hardware name: Firefly ROC-RK3399-PC Board (DT) > [ 100.127454] Workqueue: kblockd blk_mq_run_work_fn > [ 100.127885] pstate: 20000085 (nzCv daIf -PAN -UAO) > [ 100.128318] pc : cqhci_irq+0x30c/0x480 > [ 100.128660] lr : cqhci_irq+0x30c/0x480 > [ 100.128997] sp : ffff800010003d10 > [ 100.129298] x29: ffff800010003d10 x28: 0000000000000000 > [ 100.129777] x27: 0000000000000001 x26: ffff8000108e0fe8 > [ 100.130257] x25: ffff0000f5ae5c98 x24: ffff800010b7e1a8 > [ 100.130737] x23: ffff800010b198c8 x22: ffff0000f5a80000 > [ 100.131216] x21: 0000000000000002 x20: 0000000000000002 > [ 100.131694] x19: ffff0000f5ae5c80 x18: 0000000000000010 > [ 100.132173] x17: 0000000000000000 x16: 0000000000000000 > [ 100.132653] x15: ffffffffffffffff x14: ffff800010b198c8 > [ 100.133132] x13: ffff800090003a77 x12: ffff800010003a7f > [ 100.133612] x11: ffff800010b30000 x10: ffff800010003a00 > [ 100.134092] x9 : 00000000ffffffd0 x8 : ffff80001045a060 > [ 100.134571] x7 : 000000000000025f x6 : ffff800010b979e2 > [ 100.135050] x5 : 0000000000000001 x4 : 0000000000000000 > [ 100.135529] x3 : 0000000000000000 x2 : 0000000000000000 > [ 100.136007] x1 : e005989da46f2500 x0 : 0000000000000000 > [ 100.136486] Call trace: > [ 100.136719] cqhci_irq+0x30c/0x480 > [ 100.137033] sdhci_arasan_cqhci_irq+0x58/0x80 > [ 100.137430] sdhci_irq+0xb8/0xbb8 > [ 100.137742] __handle_irq_event_percpu+0x6c/0x170 > [ 100.138169] handle_irq_event_percpu+0x34/0x88 > [ 100.138575] handle_irq_event+0x44/0xc8 > [ 100.138927] handle_fasteoi_irq+0xb4/0x160 > [ 100.139302] generic_handle_irq+0x24/0x38 > [ 100.139670] __handle_domain_irq+0x60/0xb8 > [ 100.140045] gic_handle_irq+0xc0/0x158 > [ 100.140389] el1_irq+0xb8/0x180 > [ 100.140684] _raw_spin_unlock_irqrestore+0x20/0x48 > [ 100.141119] sdhci_cqe_enable+0xec/0x108 > [ 100.141478] sdhci_arasan_cqe_enable+0x4c/0x58 > [ 100.141880] cqhci_request+0x2d0/0x500 > [ 100.142226] mmc_cqe_start_req+0x50/0x60 > [ 100.142585] mmc_blk_mq_issue_rq+0x430/0x794 > [ 100.142974] mmc_mq_queue_rq+0x104/0x270 > [ 100.143332] blk_mq_dispatch_rq_list+0xa8/0x580 > [ 100.143746] blk_mq_sched_dispatch_requests+0xf4/0x1d8 > [ 100.144210] __blk_mq_run_hw_queue+0xac/0x120 > [ 100.144605] blk_mq_run_work_fn+0x1c/0x28 > [ 100.144974] process_one_work+0x1e0/0x358 > [ 100.145340] worker_thread+0x40/0x488 > [ 100.145679] kthread+0x118/0x120 > [ 100.145977] ret_from_fork+0x10/0x18 > [ 100.146302] ---[ end trace 6277099ad751ed64 ]--- > [ 100.213815] mmc1: running CQE recovery > [ 100.413933] mmc1: running CQE recovery > > > > > [0] https://patchwork.kernel.org/patch/10835567/ > > most current v2 it seems is https://patchwork.kernel.org/patch/10842421/ > > > >> Therefore I propose to disable HS400 mode on roc-pc for now. > > > > Hoping for more input :-) > > Hoping, too. > > > Gruß, > > > > > > Heiko > > > > > >> Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx> > >> --- > >> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 -- > >> 1 file changed, 2 deletions(-) > >> > >> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi > >> index 29a50a083c42..33df95e384b4 100644 > >> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi > >> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi > >> @@ -660,8 +660,6 @@ > >> > >> &sdhci { > >> bus-width = <8>; > >> - mmc-hs400-1_8v; > >> - mmc-hs400-enhanced-strobe; > >> non-removable; > >> status = "okay"; > >> }; > >> > > > >