From: Ludovic Barre <ludovic.barre@xxxxxx> This patch series adds busy detect for stm32 sdmmc variant. Some adaptations are required: -On sdmmc the data timer is started on data transfert and busy state, so we must add hardware busy timeout support. -Add busy_complete callback at mmci_host_ops to allow to define a specific busy completion by variant. -Add sdmmc busy_complete callback. V6: -mmci_start_command: set datatimer only on rsp_busy flag (remove host->mrq->data). -move max_busy_timeout in set_ios callback. -typo fix: err_msk, clks on one lines. V5: -Replaces !cmd->data to !host->mrq->data to avoid overwrite of datatimer register by the first command (cmd23, without data) of SBC request. V4: -Re-work with busy_complete callback -In series, move "mmc: mmci: add hardware busy timeout feature" in first to simplify busy_complete prototype with err_msk parameter. V3: -rebase on latest mmc next -replace re-read by status parameter. V2: -mmci_cmd_irq cleanup in separate patch. -simplify the busy_detect_flag exclude -replace sdmmc specific comment in "mmc: mmci: avoid fake busy polling in mmci_irq" to focus on common behavior Ludovic Barre (3): mmc: mmci: add hardware busy timeout feature mmc: mmci: add busy_complete callback mmc: mmci: sdmmc: add busy_complete callback drivers/mmc/host/mmci.c | 183 +++++++++++++++++----------- drivers/mmc/host/mmci.h | 7 +- drivers/mmc/host/mmci_stm32_sdmmc.c | 38 ++++++ 3 files changed, 156 insertions(+), 72 deletions(-) -- 2.17.1
