On 27/08/19 3:33 AM, Ben Chuang wrote:
> From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
>
> Add support for the GL9750 and GL9755 chipsets.
>
> Enable v4 mode and wait 5ms after set 1.8V signal enable for GL9750/
> GL9755. Fix the value of SDHCI_MAX_CURRENT register and use the vendor
> tuning flow for GL9750.
Looks good, one minor comment
>
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> Co-developed-by: Michael K Johnson <johnsonm@xxxxxxxxx>
> Signed-off-by: Michael K Johnson <johnsonm@xxxxxxxxx>
> ---
> drivers/mmc/host/Makefile | 2 +-
> drivers/mmc/host/sdhci-pci-core.c | 2 +
> drivers/mmc/host/sdhci-pci-gli.c | 354 ++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-pci.h | 5 +
> 4 files changed, 362 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mmc/host/sdhci-pci-gli.c
>
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 73578718f119..661445415090 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> obj-$(CONFIG_MMC_SDHCI) += sdhci.o
> obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
> sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
> - sdhci-pci-dwc-mshc.o
> + sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
> obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
> obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
> obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index 4154ee11b47d..e5835fbf73bc 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -1682,6 +1682,8 @@ static const struct pci_device_id pci_ids[] = {
> SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
> SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
> SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
> + SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
> + SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
> SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
> /* Generic SD host controller */
> {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> new file mode 100644
> index 000000000000..d0ca3c60f8de
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -0,0 +1,354 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Genesys Logic, Inc.
> + *
> + * Authors: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> + *
> + * Version: v0.9.0 (2019-08-08)
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/pci.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/delay.h>
> +#include "sdhci.h"
> +#include "sdhci-pci.h"
> +
> +/* Genesys Logic extra registers */
> +#define SDHCI_GLI_9750_WT 0x800
> +#define SDHCI_GLI_9750_WT_EN BIT(0)
> +#define GLI_9750_WT_EN_ON 0x1
> +#define GLI_9750_WT_EN_OFF 0x0
> +
> +#define SDHCI_GLI_9750_DRIVING 0x860
> +#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
> +#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
> +#define GLI_9750_DRIVING_1_VALUE 0xFFF
> +#define GLI_9750_DRIVING_2_VALUE 0x3
> +
> +#define SDHCI_GLI_9750_PLL 0x864
> +#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
> +#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
> +#define GLI_9750_PLL_TX2_INV_VALUE 0x1
> +#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
> +
> +#define SDHCI_GLI_9750_SW_CTRL 0x874
> +#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
> +#define GLI_9750_SW_CTRL_4_VALUE 0x3
> +
> +#define SDHCI_GLI_9750_MISC 0x878
> +#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
> +#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
> +#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
> +#define GLI_9750_MISC_TX1_INV_VALUE 0x0
> +#define GLI_9750_MISC_RX_INV_ON 0x1
> +#define GLI_9750_MISC_RX_INV_OFF 0x0
> +#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
> +#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
> +
> +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
> +#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
> +#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
> +#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
> +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
> +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
> +#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
> +#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
> +
> +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
> +#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
> +#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
> +
> +#define GLI_MAX_TUNING_LOOP 40
> +
> +/* Genesys Logic chipset */
> +static inline void gl9750_wt_on(struct sdhci_host *host)
> +{
> + u32 wt_value = 0;
> + u32 wt_enable = 0;
> +
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
> +
> + if (wt_enable == GLI_9750_WT_EN_ON)
> + return;
> +
> + wt_value &= ~SDHCI_GLI_9750_WT_EN;
> + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
> +
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static inline void gl9750_wt_off(struct sdhci_host *host)
> +{
> + u32 wt_value = 0;
> + u32 wt_enable = 0;
> +
> + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
> + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
> +
> + if (wt_enable == GLI_9750_WT_EN_OFF)
> + return;
> +
> + wt_value &= ~SDHCI_GLI_9750_WT_EN;
> + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
> +
> + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
> +}
> +
> +static void gli_set_9750(struct sdhci_host *host)
> +{
> + u32 driving_value = 0;
> + u32 pll_value = 0;
> + u32 sw_ctrl_value = 0;
> + u32 misc_value = 0;
> + u32 parameter_value = 0;
> + u32 control_value = 0;
> +
> + u16 ctrl2 = 0;
> +
> + gl9750_wt_on(host);
> +
> + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
> + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
> + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
> + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
> + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
> + driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
> + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
> + GLI_9750_DRIVING_1_VALUE);
> + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
> + GLI_9750_DRIVING_2_VALUE);
> + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
> +
> + sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
> + sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
> + GLI_9750_SW_CTRL_4_VALUE);
> + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
> +
> + /* reset the tuning flow after reinit and before starting tuning */
> + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
> + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
> + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
> + GLI_9750_PLL_TX2_INV_VALUE);
> + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
> + GLI_9750_PLL_TX2_DLY_VALUE);
> +
> + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
> + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
> + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
> + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
> + GLI_9750_MISC_TX1_INV_VALUE);
> + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
> + GLI_9750_MISC_RX_INV_VALUE);
> + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
> + GLI_9750_MISC_TX1_DLY_VALUE);
> +
> + parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
> + parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
> + GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
> +
> + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
> + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
> + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
> + GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
> + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
> + GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
> +
> + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> +
> + /* disable tuned clk */
> + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> + /* enable tuning parameters control */
> + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
> + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
> + GLI_9750_TUNING_CONTROL_EN_ON);
> + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + /* write tuning parameters */
> + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
> +
> + /* disable tuning parameters control */
> + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
> + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
> + GLI_9750_TUNING_CONTROL_EN_OFF);
> + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
> +
> + /* clear tuned clk */
> + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
> + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
> +
> + udelay(1);
> +
> + gl9750_wt_off(host);
> +}
> +
> +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
> +{
> + u32 misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> +
> + gl9750_wt_on(host);
> +
> + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
> + if (b) {
> + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
> + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
> + GLI_9750_MISC_RX_INV_ON);
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> + } else {
> + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
> + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
> + GLI_9750_MISC_RX_INV_OFF);
> + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
> + }
> +
> + gl9750_wt_off(host);
> +}
> +
> +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
> +{
> + int i;
> + int rx_inv = 0;
> +
> + for (rx_inv = 0; rx_inv < 2; rx_inv++) {
> + if (rx_inv & 0x1)
> + gli_set_9750_rx_inv(host, true);
> + else
> + gli_set_9750_rx_inv(host, false);
> +
> + sdhci_start_tuning(host);
> +
> + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
> + u16 ctrl;
> +
> + sdhci_send_tuning(host, opcode);
> +
> + if (!host->tuning_done) {
> + if (rx_inv == 1) {
> + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
> + mmc_hostname(host->mmc));
> + sdhci_abort_tuning(host, opcode);
> + return -ETIMEDOUT;
> + }
> + sdhci_abort_tuning(host, opcode);
> + break;
> + }
> +
> + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
> + if (ctrl & SDHCI_CTRL_TUNED_CLK)
> + return 0; /* Success! */
> + break;
> + }
> + }
> + }
> +
> + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
> + mmc_hostname(host->mmc));
> + sdhci_reset_tuning(host);
> + return -EAGAIN;
> +}
> +
> +static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
> +{
> + host->mmc->retune_period = 0;
> + if (host->tuning_mode == SDHCI_TUNING_MODE_1)
> + host->mmc->retune_period = host->tuning_count;
> +
> + gli_set_9750(host);
> + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
> + sdhci_end_tuning(host);
> +
> + return 0;
> +}
> +
> +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> +{
> + struct sdhci_host *host = slot->host;
> +
> + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + sdhci_enable_v4_mode(host);
> +
> + return 0;
> +}
> +
> +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
> +{
> + struct sdhci_host *host = slot->host;
> +
> + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> + sdhci_enable_v4_mode(host);
> +
> + return 0;
> +}
> +
> +static void sdhci_gli_voltage_switch(struct sdhci_host *host)
> +{
> + usleep_range(5000, 5500);
> +}
> +
> +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
> +{
> + sdhci_reset(host, mask);
> + gli_set_9750(host);
> +}
> +
> +#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
Arguably CONFIG_MMC_SDHCI_IO_ACCESSORS needs to be removed altogether. i.e.
making the accessors always available. So for now, I'd prefer to select
MMC_SDHCI_IO_ACCESSORS:
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 14d89a108edd..c3bd967d8a1a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
depends on MMC_SDHCI && PCI
select MMC_CQHCI
select IOSF_MBI if X86
+ select MMC_SDHCI_IO_ACCESSORS
help
This selects the PCI Secure Digital Host Controller Interface.
Most controllers found today are PCI devices.
> +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
> +{
> + u32 value;
> +
> + value = readl(host->ioaddr + reg);
> + if (unlikely(reg == SDHCI_MAX_CURRENT)) {
> + if (!(value & 0xff))
> + value |= 0xc8;
> + }
> + return value;
> +}
> +#endif
> +
> +static const struct sdhci_ops sdhci_gl9755_ops = {
> + .set_clock = sdhci_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .voltage_switch = sdhci_gli_voltage_switch,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_gl9755 = {
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> + .probe_slot = gli_probe_slot_gl9755,
> + .ops = &sdhci_gl9755_ops,
> +};
> +
> +static const struct sdhci_ops sdhci_gl9750_ops = {
> +#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
> + .read_l = sdhci_gl9750_readl,
> +#endif
> + .set_clock = sdhci_set_clock,
> + .enable_dma = sdhci_pci_enable_dma,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_gl9750_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .voltage_switch = sdhci_gli_voltage_switch,
> + .platform_execute_tuning = gl9750_execute_tuning,
> +};
> +
> +const struct sdhci_pci_fixes sdhci_gl9750 = {
> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
> + .probe_slot = gli_probe_slot_gl9750,
> + .ops = &sdhci_gl9750_ops,
> +};
> +
> diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
> index e5dc6e44c7a4..738ba5afcc20 100644
> --- a/drivers/mmc/host/sdhci-pci.h
> +++ b/drivers/mmc/host/sdhci-pci.h
> @@ -65,6 +65,9 @@
>
> #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
>
> +#define PCI_DEVICE_ID_GLI_9755 0x9755
> +#define PCI_DEVICE_ID_GLI_9750 0x9750
> +
> /*
> * PCI device class and mask
> */
> @@ -185,5 +188,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
> extern const struct sdhci_pci_fixes sdhci_arasan;
> extern const struct sdhci_pci_fixes sdhci_snps;
> extern const struct sdhci_pci_fixes sdhci_o2;
> +extern const struct sdhci_pci_fixes sdhci_gl9750;
> +extern const struct sdhci_pci_fixes sdhci_gl9755;
>
> #endif /* __SDHCI_PCI_H */
>
