On Thu, 22 Aug 2019, at 21:15, Ulf Hansson wrote:
> On Thu, 15 Aug 2019 at 07:37, Andrew Jeffery <andrew@xxxxxxxx> wrote:
> >
> >
> >
> > On Thu, 15 Aug 2019, at 15:06, Joel Stanley wrote:
> > > On Wed, 7 Aug 2019 at 00:38, Andrew Jeffery <andrew@xxxxxxxx> wrote:
> > > >
> > > > The ASPEED SD/SDIO/MMC controller exposes two slots implementing the
> > > > SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> > > > data bus if only a single slot is enabled.
> > > >
> > > > Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>
> > >
> > > Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
> > >
> > > Two minor comments below.
> > >
> > > > +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > > > @@ -0,0 +1,105 @@
> > > > +# SPDX-License-Identifier: GPL-2.0-or-later
> > >
> > > No "Copyright IBM" ?
> >
> > I'm going rogue.
> >
> > That reminds me I should chase up where we got to with the binding
> > licensing.
> >
> > >
> > > > +%YAML 1.2
> > > > +---
> > >
> > > > +
> > > > +examples:
> > > > + - |
> > > > + #include <dt-bindings/clock/aspeed-clock.h>
> > > > + sdc@1e740000 {
> > > > + compatible = "aspeed,ast2500-sd-controller";
> > > > + reg = <0x1e740000 0x100>;
> > > > + #address-cells = <1>;
> > > > + #size-cells = <1>;
> > > > + ranges = <0 0x1e740000 0x10000>;
> > >
> > > According to the datasheet this could be 0x20000. It does not matter
> > > though, as there's nothing in it past 0x300.
> >
> > Good catch.
> >
>
> Are you planning on sending a v6 or you want me to apply this and you
> can post a patch on top?
Yeah, sorry, I wasn't very clear there. I was hoping just to do a follow-up
patch with the cleanups if you're okay with that?
Andrew
