On 20/08/19 5:06 AM, Ben Chuang wrote:
> From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
>
> According to section 3.2.1 internal clock setup in SD Host Controller
> Simplified Specifications 4.20, the timeout of loop for checking
> internal clock stable is defined as 150ms.
>
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> Co-developed-by: Michael K Johnson <johnsonm@xxxxxxxxx>
> Signed-off-by: Michael K Johnson <johnsonm@xxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> ---
> drivers/mmc/host/sdhci.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 59acf8e3331e..bed0760a6c2a 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1636,8 +1636,8 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
> clk |= SDHCI_CLOCK_INT_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>
> - /* Wait max 20 ms */
> - timeout = ktime_add_ms(ktime_get(), 20);
> + /* Wait max 150 ms */
> + timeout = ktime_add_ms(ktime_get(), 150);
> while (1) {
> bool timedout = ktime_after(ktime_get(), timeout);
>
>
