On 20/08/19 1:11 AM, Shirley Her (SC) wrote:
> Fix data read/write error in HS200 mode due to chip DLL lock phase shift
>
> Signed-off-by:Shirley Her <shirley.her@xxxxxxxxxxxxxx>
Please do not prefix the subject by "Subject: "
Please put a space after Signed-off-by:
> ---
> change in V7:
> 1. change subject
> 2. change the sdhci_o2_wait_dll_detect_lock function
> 3. add suitable usleep_range() to detect dll lock status
>
> chagne in V6:
> 1. define constant by using array size
> 2. add more explanation for the code
> 3. fix loop forever code error
>
> change in V5:
> 1. split 2 patches into 3 patches
> 2. make dll_adjust_count start from 0
> 3. fix ret overwritten issue
> 4. use break instead of goto
>
> change in V4:
> 1. add a bug fix for V3
>
> change in V3:
> 1. add more explanation in dll_recovery and execute_tuning function
> 2. move dll_adjust_count to O2_host struct
> 3. fix some coding style error
> 4. renaming O2_PLL_WDT_CONTROL1 TO O2_PLL_DLL_WDT_CONTROL1
>
> change in V2:
> 1. use usleep_range instead of udelay
> 2. move dll_adjust_count to sdhci-pci-o2micro.c
>
> chagne in V1:
> 1. add error recovery function to relock DLL with correct phase
> 2. retuning HS200 after DLL locked
> ---
> drivers/mmc/host/sdhci-pci-o2micro.c | 125 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 123 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 021e481..f0b3d93 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -11,6 +11,7 @@
> #include <linux/mmc/host.h>
> #include <linux/mmc/mmc.h>
> #include <linux/delay.h>
> +#include <linux/iopoll.h>
>
> #include "sdhci.h"
> #include "sdhci-pci.h"
> @@ -55,9 +56,18 @@
> #define O2_PLL_FORCE_ACTIVE BIT(18)
> #define O2_PLL_LOCK_STATUS BIT(14)
> #define O2_PLL_SOFT_RESET BIT(12)
> +#define O2_DLL_LOCK_STATUS BIT(11)
>
> #define O2_SD_DETECT_SETTING 0x324
>
> +static const u32 dmdn_table[] = {0x2B1C0000,
> + 0x2C1A0000, 0x371B0000, 0x35100000};
> +#define DMDN_SZ ARRAY_SIZE(dmdn_table)
> +
> +struct o2_host {
> + u8 dll_adjust_count;
> +};
> +
> static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
> {
> ktime_t timeout;
> @@ -133,7 +143,8 @@ static int sdhci_o2_get_cd(struct mmc_host *mmc)
> {
> struct sdhci_host *host = mmc_priv(mmc);
>
> - sdhci_o2_enable_internal_clock(host);
> + if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
> + sdhci_o2_enable_internal_clock(host);
>
> return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
> }
> @@ -141,6 +152,7 @@ static int sdhci_o2_get_cd(struct mmc_host *mmc)
> static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
> {
> u32 scratch_32;
> +
> pci_read_config_dword(chip->pdev,
> O2_SD_PLL_SETTING, &scratch_32);
>
> @@ -151,6 +163,25 @@ static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
> O2_SD_PLL_SETTING, scratch_32);
> }
>
> +static u32 sdhci_o2_pll_dll_wdt_control(struct sdhci_host *host)
> +{
> + return sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> +}
> +
> +/*
> + * This function is used to detect dll lock status.
> + * Since the dll lock status bit will toggle randomly
> + * with very short interval which needs to be polled
> + * as fast as possible. Set sleep_us as 1 microsecond.
> + */
> +static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host)
> +{
> + u32 scratch32 = 0;
> +
> + return readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
> + scratch32, !(scratch32 & O2_DLL_LOCK_STATUS), 1, 1000000);
> +}
> +
> static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
> {
> u16 reg;
> @@ -188,6 +219,83 @@ static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode)
> sdhci_reset_tuning(host);
> }
>
> +/*
> + * This function is used to fix o2 dll shift issue.
> + * It isn't necessary to detect card present before recovery.
> + * Firstly, it is used by bht emmc card, which is embedded.
> + * Second, before call recovery card present will be detected
> + * outside of the execute tuning function.
> + */
> +static int sdhci_o2_dll_recovery(struct sdhci_host *host)
> +{
> + int ret = 0;
> + u8 scratch_8 = 0;
> + u32 scratch_32 = 0;
> + struct sdhci_pci_slot *slot = sdhci_priv(host);
> + struct sdhci_pci_chip *chip = slot->chip;
> + struct o2_host *o2_host = sdhci_pci_priv(slot);
> +
> + /* UnLock WP */
> + pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch_8);
> + scratch_8 &= 0x7f;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> + while (o2_host->dll_adjust_count < DMDN_SZ && !ret) {
> + /* Disable clock */
> + sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
> +
> + /* PLL software reset */
> + scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
> + scratch_32 |= O2_PLL_SOFT_RESET;
> + sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1);
> +
> + pci_read_config_dword(chip->pdev,
> + O2_SD_FUNC_REG4,
> + &scratch_32);
> + /* Enable Base Clk setting change */
> + scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
> + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32);
> + o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]);
> +
> + /* Enable internal clock */
> + scratch_8 = SDHCI_CLOCK_INT_EN;
> + sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
> +
> + if (sdhci_o2_get_cd(host->mmc)) {
> + /*
> + * need wait at least 5ms for dll status stable,
> + * after enable internal clock
> + */
> + usleep_range(5000, 6000);
> + if (sdhci_o2_wait_dll_detect_lock(host)) {
> + scratch_8 |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writeb(host, scratch_8,
> + SDHCI_CLOCK_CONTROL);
> + ret = 1;
> + } else {
> + pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n",
> + mmc_hostname(host->mmc),
> + o2_host->dll_adjust_count);
> + }
> + } else {
> + pr_err("%s: card present detect failed.\n",
> + mmc_hostname(host->mmc));
> + break;
> + }
> +
> + o2_host->dll_adjust_count++;
> + }
> + if (!ret && o2_host->dll_adjust_count == DMDN_SZ)
Isn't this off by 1? i.e. should be o2_host->dll_adjust_count > DMDN_SZ
> + pr_err("%s: DLL adjust over max times\n",
> + mmc_hostname(host->mmc));
> + /* Lock WP */
> + pci_read_config_byte(chip->pdev,
> + O2_SD_LOCK_WP, &scratch_8);
> + scratch_8 |= 0x80;
> + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
> + return ret;
> +}
> +
> static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> @@ -202,7 +310,16 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200))
> return -EINVAL;
> -
> + /*
> + * Judge the tuning reason, whether caused by dll shift
> + * If cause by dll shift, should call sdhci_o2_dll_recovery
> + */
> + if (!sdhci_o2_wait_dll_detect_lock(host))
> + if (!sdhci_o2_dll_recovery(host)) {
> + pr_err("%s: o2 dll recovery failed\n",
> + mmc_hostname(host->mmc));
> + return -EINVAL;
> + }
> /*
> * o2 sdhci host didn't support 8bit emmc tuning
> */
> @@ -370,6 +487,7 @@ static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
> clk |= SDHCI_CLOCK_INT_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>
> + sdhci_o2_enable_internal_clock(host);
> if (sdhci_o2_get_cd(host->mmc)) {
> clk |= SDHCI_CLOCK_CARD_EN;
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> @@ -395,12 +513,14 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
> {
> struct sdhci_pci_chip *chip;
> struct sdhci_host *host;
> + struct o2_host *o2_host = sdhci_pci_priv(slot);
> u32 reg, caps;
> int ret;
>
> chip = slot->chip;
> host = slot->host;
>
> + o2_host->dll_adjust_count = 0;
Please remove trailing white space after "o2_host->dll_adjust_count = 0;"
> caps = sdhci_readl(host, SDHCI_CAPABILITIES);
>
> /*
> @@ -687,4 +807,5 @@ const struct sdhci_pci_fixes sdhci_o2 = {
> .resume = sdhci_pci_o2_resume,
> #endif
> .ops = &sdhci_pci_o2_ops,
> + .priv_size = sizeof(struct o2_host),
> };
>
