From: Ludovic Barre <ludovic.barre@xxxxxx>
This patch adds a specific busy_complete callback for sdmmc variant.
sdmmc has 2 status flags:
-busyd0: This is a hardware status flag (inverted value of d0 line).
it does not generate an interrupt.
-busyd0end: This indicates only end of busy following a CMD response.
On busy to Not busy changes, an interrupt is generated (if unmask)
and BUSYD0END status flag is set. Status flag is cleared by writing
corresponding interrupt clear bit in MMCICLEAR.
The legacy busy completion monitors step by step the busy progression
start/in-progress/end. On sdmmc variant, the monitoring of busy steps
is difficult and not adapted (the software can miss a step and locks
the monitoring), the sdmmc has just need to wait the busyd0end bit
without monitoring all the changes.
Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
drivers/mmc/host/mmci.c | 3 +++
drivers/mmc/host/mmci.h | 1 +
drivers/mmc/host/mmci_stm32_sdmmc.c | 38 +++++++++++++++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 17948615d4a5..2751415d0fd1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -263,6 +263,9 @@ static struct variant_data variant_stm32_sdmmc = {
.datalength_bits = 25,
.datactrl_blocksz = 14,
.stm32_idmabsize_mask = GENMASK(12, 5),
+ .busy_timeout = true,
+ .busy_detect_flag = MCI_STM32_BUSYD0,
+ .busy_detect_mask = MCI_STM32_BUSYD0ENDMASK,
.init = sdmmc_variant_init,
};
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 03eb21f1c258..64ae7720477c 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -167,6 +167,7 @@
#define MCI_ST_CARDBUSY (1 << 24)
/* Extended status bits for the STM32 variants */
#define MCI_STM32_BUSYD0 BIT(20)
+#define MCI_STM32_BUSYD0END BIT(21)
#define MMCICLEAR 0x038
#define MCI_CMDCRCFAILCLR (1 << 0)
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 8e83ae6920ae..bb5499cc9e81 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -282,6 +282,43 @@ static u32 sdmmc_get_dctrl_cfg(struct mmci_host *host)
return datactrl;
}
+bool sdmmc_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
+{
+ void __iomem *base = host->base;
+ u32 busy_d0, busy_d0end, mask;
+
+ mask = readl_relaxed(base + MMCIMASK0);
+ busy_d0end = readl_relaxed(base + MMCISTATUS) & MCI_STM32_BUSYD0END;
+ busy_d0 = readl_relaxed(base + MMCISTATUS) & MCI_STM32_BUSYD0;
+
+ /* complete if there is an error or busy_d0end */
+ if ((status & err_msk) || busy_d0end)
+ goto complete;
+
+ /*
+ * On response the busy signaling is reflected in the BUSYD0 flag.
+ * if busy_d0 is in-progress we must activate busyd0end interrupt
+ * to wait this completion. Else this request has no busy step.
+ */
+ if (busy_d0) {
+ if (!host->busy_status) {
+ writel_relaxed(mask | host->variant->busy_detect_mask,
+ base + MMCIMASK0);
+ host->busy_status = status &
+ (MCI_CMDSENT | MCI_CMDRESPEND);
+ }
+ return false;
+ }
+
+complete:
+ writel_relaxed(mask & ~host->variant->busy_detect_mask,
+ base + MMCIMASK0);
+ writel_relaxed(host->variant->busy_detect_mask, base + MMCICLEAR);
+ host->busy_status = 0;
+
+ return true;
+}
+
static struct mmci_host_ops sdmmc_variant_ops = {
.validate_data = sdmmc_idma_validate_data,
.prep_data = sdmmc_idma_prep_data,
@@ -292,6 +329,7 @@ static struct mmci_host_ops sdmmc_variant_ops = {
.dma_finalize = sdmmc_idma_finalize,
.set_clkreg = mmci_sdmmc_set_clkreg,
.set_pwrreg = mmci_sdmmc_set_pwrreg,
+ .busy_complete = sdmmc_busy_complete,
};
void sdmmc_variant_init(struct mmci_host *host)
--
2.17.1
