On 22/07/2019 19:07, Stefan Wahren wrote: > This adds a reference to the dts of the Raspberry Pi 4 B, > so we don't need to maintain the content in arm64. > > Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx> AFAIK arm64 doesn't boot without the DMA RFC patch series from Nicolas. So maybe we should wait until this is fixed before adding a for now broken device. Regards, Matthias > --- > arch/arm64/boot/dts/broadcom/Makefile | 3 ++- > arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 2 ++ > 2 files changed, 4 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts > > diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile > index d1d31cc..cb7de8d 100644 > --- a/arch/arm64/boot/dts/broadcom/Makefile > +++ b/arch/arm64/boot/dts/broadcom/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \ > +dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ > + bcm2837-rpi-3-a-plus.dtb \ > bcm2837-rpi-3-b.dtb \ > bcm2837-rpi-3-b-plus.dtb \ > bcm2837-rpi-cm3-io3.dtb > diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts > new file mode 100644 > index 0000000..d24c536 > --- /dev/null > +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts > @@ -0,0 +1,2 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include "arm/bcm2711-rpi-4-b.dts" > -- > 2.7.4 > >
