Re: [PATCH] mmc: dw_mmc: Fix occasional hang after tuning on eMMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jul 9, 2019 at 2:07 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> On Tue, 9 Jul 2019 at 00:48, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
> >
> > In commit 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after
> > response errors.") we fixed a tuning-induced hang that I saw when
> > stress testing tuning on certain SD cards.  I won't re-hash that whole
> > commit, but the summary is that as a normal part of tuning you need to
> > deal with transfer errors and there were cases where these transfer
> > errors was putting my system into a bad state causing all future
> > transfers to fail.  That commit fixed handling of the transfer errors
> > for me.
> >
> > In downstream Chrome OS my fix landed and had the same behavior for
> > all SD/MMC commands.  However, it looks like when the commit landed
> > upstream we limited it to only SD tuning commands.  Presumably this
> > was to try to get around problems that Alim Akhtar reported on exynos
> > [1].
> >
> > Unfortunately while stress testing reboots (and suspend/resume) on
> > some rk3288-based Chromebooks I found the same problem on the eMMC on
> > some of my Chromebooks (the ones with Hynix eMMC).  Since the eMMC
> > tuning command is different (MMC_SEND_TUNING_BLOCK_HS200
> > vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the
> > same situation.
> >
> > I'm hoping that whatever problems exynos was having in the past are
> > somehow magically fixed now and we can make the behavior the same for
> > all commands.
> >
> > [1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@xxxxxxxxxxxxxx
> >
> > Fixes: 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.")
> > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> > Cc: Alim Akhtar <alim.akhtar@xxxxxxxxx>
> > Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> > ---
> > Marek (or anyone else using exynos): is it easy for you to test this
> > and check if things are still broken when we land this patch?  If so,
> > I guess we could have a quirk to have different behavior for just
> > Rockchip SoCs but I'd rather avoid that if possible.
> >
> > NOTE: I'm not hoping totally in vain here.  It is possible that some
> > of the CTO/DTO timers that landed could be the magic that would get
> > exynos unstuck.
>
> I have eMMC module attached to Odroid U3 (Exynos4412,
> samsung,exynos4412-dw-mshc). What is the testing procedure? With your
> patch it boots fine:
> [    3.698637] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot
> req 52000000Hz, actual 50000000HZ div = 0)
> [    3.703900] mmc1: new DDR MMC card at address 0001
> [    3.728458] mmcblk1: mmc1:0001 008G92 7.28 GiB

To really test it, it'd be nice to see some HS200 eMMC cards enumerate
OK.  Specifically the patch adjusts the error handling and the place
where that happens mostly is during tuning.

I'll also try to find some time today to check a peach_pit or a
peach_pi.  I think I saw one in the pile near my desk so if it isn't
in too bad of a shape I can give mainline a shot on it.

-Doug



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux