Re: [PATCH 3/3] mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[...]

> >>
> >>
> >>> In regards to the mmc data part, I suggest to drop the
> >>> ->set_tap_delay() callback, but rather use a boolean flag to indicate
> >>> whether clock phases needs to be changed for the variant. Potentially
> >>> that could even be skipped and instead call clk_set_phase()
> >>> unconditionally, as the clock core deals fine with clock providers
> >>> that doesn't support the ->set_phase() callback.
> >>
> >> In connection to another version of this driver for latest Xilinx chip
> >> it would be better to keep set_tap_delay callback in the driver. The
> >> reason is that new chip/ip is capable to setup tap delays directly
> >> without asking firmware to do it. That's why for versal IP there is a
> >> need to call different setup_tap_delay function.
> >
> > The ->set_tap_delay() callback is for ZyncMp pointing to
> > sdhci_arasan_zynqmp_set_tap_delay(). This function calls the
> > clk_set_phase() API.
> >
> > What does ->set_tap_delay() do for the latest version?
>
> There is different set of default tap delays which should be programmed
> and it is done just via writing to registers which are the part of
> controller address space.

Okay, I see.

Not sure what makes most sense to do here, but it sounds to me like
another ->set_phase() callback should be implemented for the clock
provider. In other words, calling clk_set_phase() should continue to
works just fine for this case as well. If it turns out to be
inconvenient, we can always add the ->set_tap_delay() at a later point
when it makes more sense.

[...]

Kind regards
Uffe



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux