[PATCH v2 1/3] mmc: add Coldfire esdhc support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This driver has been developed as a separate module starting
from the similar sdhci-esdhc-fls.c.
Separation has been mainly driven from change in endianness.

Signed-off-by: Angelo Dureghello <angelo@xxxxxxxx>
---
 drivers/mmc/host/sdhci-esdhc-mcf.c          | 442 ++++++++++++++++++++
 include/linux/platform_data/mmc-esdhc-mcf.h |  17 +
 2 files changed, 459 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-esdhc-mcf.c
 create mode 100644 include/linux/platform_data/mmc-esdhc-mcf.h

diff --git a/drivers/mmc/host/sdhci-esdhc-mcf.c b/drivers/mmc/host/sdhci-esdhc-mcf.c
new file mode 100644
index 000000000000..8e910ee412a8
--- /dev/null
+++ b/drivers/mmc/host/sdhci-esdhc-mcf.c
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Freescale eSDHC ColdFire family controller driver, platform bus.
+ *
+ * Copyright (c) 2019 Sysam, Italy
+ *   Author: Angelo Dureghello <angelo@xxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_data/mmc-esdhc-mcf.h>
+#include <linux/platform_device.h>
+#include <asm/mcfsim.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define	ESDHC_PROCTL_D3CD		0x08
+#define ESDHC_PROCTL_AI			0x20
+#define ESDHC_PROCTL_DTW_MASK		(0x3 << 1)
+#define ESDHC_SYS_CTRL_DTOCV_MASK	0x0f
+#define ESDHC_DEFAULT_HOST_CONTROL	0x28
+
+/*
+ * Freescale eSDHC has DMA ERR flag at bit 28, not as std spec says, bit 25.
+ */
+#define ESDHC_INT_VENDOR_SPEC_DMA_ERR	(1 << 28)
+
+struct pltfm_mcf_data {
+	struct clk *clk_ipg;
+	struct clk *clk_ahb;
+	struct clk *clk_per;
+	int aside;
+	int current_bus_width;
+};
+
+static inline void esdhc_clrset_be(struct sdhci_host *host,
+				   u32 mask, u32 val, int reg)
+{
+	void __iomem *base = host->ioaddr + (reg & ~3);
+	u8 shift = (reg & 3) << 3;
+
+	mask <<= shift;
+	val <<= shift;
+
+	if (reg == SDHCI_HOST_CONTROL)
+		val |= ESDHC_PROCTL_D3CD;
+
+	writel((readl(base) & ~mask) | val, base);
+}
+
+/*
+ * Note: mcf is big-endian, single bytes need to be accessed at big endian
+ * offsets.
+ */
+static void esdhc_mcf_writeb_be(struct sdhci_host *host, u8 val, int reg)
+{
+	void __iomem *base = host->ioaddr + (reg & ~3);
+	u8 shift = (reg & 3) << 3;
+	u32 mask = ~(0xff << shift);
+
+	switch (reg) {
+	case SDHCI_HOST_CONTROL:
+		/*
+		 * Recomposition needed, restore always endianness and
+		 * keep D3CD and AI, just setting bus width.
+		 */
+		writel(ESDHC_DEFAULT_HOST_CONTROL | (val & 0x6),
+		       host->ioaddr + SDHCI_HOST_CONTROL);
+		return;
+	}
+
+	writel((readl(base) & mask) | (val << shift), base);
+}
+
+static void esdhc_mcf_writew_be(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+	void __iomem *base = host->ioaddr + (reg & ~3);
+	u8 shift = (reg & 3) << 3;
+	u32 mask = ~(0xffff << shift);
+
+	switch (reg) {
+	case SDHCI_TRANSFER_MODE:
+		mcf_data->aside = val;
+		return;
+	case SDHCI_COMMAND:
+		/*
+		 * As for the fsl driver,
+		 * we have to set the mode in a single write here.
+		 */
+		writel(val << 16 | mcf_data->aside,
+			       host->ioaddr + SDHCI_TRANSFER_MODE);
+		return;
+	}
+
+	writel((readl(base) & mask) | (val << shift), base);
+}
+
+static void esdhc_mcf_writel_be(struct sdhci_host *host, u32 val, int reg)
+{
+	u32 data;
+
+	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE ||
+		reg == SDHCI_INT_STATUS)) {
+		if (val & SDHCI_INT_CARD_INT) {
+			/*
+			 * eSDHC issue, errata:
+			 * ECF218: Misses SDIO interrupt when CINT is disabled
+			 */
+			data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+			data &= ~ESDHC_PROCTL_D3CD;
+			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+			data |= ESDHC_PROCTL_D3CD;
+			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+		}
+		/*
+		 * On some commands, mcf controller gives a false data CRC
+		 * error, since checking the read buffer, it is correct.
+		 * Workaround, suppressing CRC error interrupt flag.
+		 */
+		if (reg == SDHCI_INT_ENABLE)
+			val &= ~SDHCI_INT_DATA_CRC;
+	}
+
+	writel(val, host->ioaddr + reg);
+}
+
+static u8 esdhc_mcf_readb_be(struct sdhci_host *host, int reg)
+{
+	u8 __iomem *base = host->ioaddr + (reg & ~3);
+
+	return readb(base + 3 - (reg & 3));
+}
+
+static u16 esdhc_mcf_readw_be(struct sdhci_host *host, int reg)
+{
+	u16 __iomem *base = host->ioaddr + (reg & ~3);
+
+	return readb(base + 1 - ((reg >> 1) & 1));
+}
+
+static u32 esdhc_mcf_readl_be(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	/*
+	 * RM (25.3.9) sd pin clock must never exceed 25Mhz.
+	 * So forcing legacy mode at 25Mhz.
+	 */
+	if (unlikely(reg == SDHCI_CAPABILITIES))
+		val &= ~SDHCI_CAN_DO_HISPD;
+
+	if (unlikely(reg == SDHCI_INT_STATUS)) {
+		if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
+			val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
+			val |= SDHCI_INT_ADMA_ERROR;
+		}
+	}
+
+	return val;
+}
+
+static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host)
+{
+	return 1 << 27;
+}
+
+static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+	/* Use maximum timeout counter */
+	esdhc_clrset_be(host, ESDHC_SYS_CTRL_DTOCV_MASK, 0xE,
+				SDHCI_TIMEOUT_CONTROL);
+}
+
+static void esdhc_reset(struct sdhci_host *host, u8 mask)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_reset(host, mask);
+
+	esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK,
+			mcf_data->current_bus_width, SDHCI_HOST_CONTROL);
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock;
+}
+
+static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return pltfm_host->clock / 256 / 16;
+}
+
+static void esdhc_pltfm_set_clock(struct sdhci_host *host,
+					 unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	unsigned long *pll_dr = (unsigned long *)MCF_PLL_DR;
+	u32 fvco, fsys, fesdhc, temp;
+	const int sdclkfs[] = {2, 4, 8, 16, 32, 64, 128, 256};
+	int delta, old_delta = clock;
+	int i, q, ri, rq;
+
+	if (clock == 0) {
+		host->mmc->actual_clock = 0;
+		return;
+	}
+
+	/*
+	 * ColdFire eSDHC clock.s
+	 *
+	 * pll -+-> / outdiv1 --> fsys
+	 *      +-> / outdiv3 --> eSDHC clock ---> / SDCCLKFS / DVS
+	 *
+	 * mcf5441x datasheet says:
+	 * (8.1.2) eSDHC should be 40 MHz max
+	 * (25.3.9) eSDHC input is, as example, 96 Mhz ...
+	 * (25.3.9) sd pin clock must never exceed 25Mhz
+	 *
+	 * fvco = fsys * outdvi1 + 1
+	 * fshdc = fvco / outdiv3 + 1
+	 */
+	temp = readl(pll_dr);
+	fsys = pltfm_host->clock;
+	fvco = fsys * ((temp & 0x1f) + 1);
+	fesdhc = fvco / (((temp >> 10) & 0x1f) + 1);
+
+	for (i = 0; i < 8; ++i) {
+		int result = fesdhc / sdclkfs[i];
+
+		for (q = 1; q < 17; ++q) {
+			int finale = result / q;
+
+			delta = abs(clock - finale);
+
+			if (delta < old_delta) {
+				old_delta = delta;
+				ri = i;
+				rq = q;
+			}
+		}
+	}
+
+	/*
+	 * Apply divisors and re-enable all the clocks
+	 */
+	temp = ((sdclkfs[ri] >> 1) << 8) | ((rq - 1) << 4) |
+		(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN);
+	esdhc_clrset_be(host, 0x0000fff7, temp, SDHCI_CLOCK_CONTROL);
+
+	host->mmc->actual_clock = clock;
+
+	mdelay(1);
+}
+
+static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+	switch (width) {
+	case MMC_BUS_WIDTH_4:
+		mcf_data->current_bus_width = ESDHC_CTRL_4BITBUS;
+		break;
+	default:
+		mcf_data->current_bus_width = 0;
+		break;
+	}
+
+	esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK,
+			mcf_data->current_bus_width, SDHCI_HOST_CONTROL);
+}
+
+static struct sdhci_ops sdhci_esdhc_ops = {
+	.reset = esdhc_reset,
+	.set_clock = esdhc_pltfm_set_clock,
+	.get_max_clock = esdhc_pltfm_get_max_clock,
+	.get_min_clock = esdhc_pltfm_get_min_clock,
+	.set_bus_width = esdhc_pltfm_set_bus_width,
+	.get_max_timeout_count = esdhc_get_max_timeout_count,
+	.set_timeout = esdhc_set_timeout,
+	.write_b = esdhc_mcf_writeb_be,
+	.write_w = esdhc_mcf_writew_be,
+	.write_l = esdhc_mcf_writel_be,
+	.read_b = esdhc_mcf_readb_be,
+	.read_w = esdhc_mcf_readw_be,
+	.read_l = esdhc_mcf_readl_be,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_mcf_pdata = {
+	.ops = &sdhci_esdhc_ops,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_FORCE_DMA,
+	.quirks2 = SDHCI_QUIRK2_USE_32BIT_BE_DMA_SWAP,
+};
+
+static int sdhci_esdhc_mcf_plat_init(struct sdhci_host *host,
+				     struct pltfm_mcf_data *mcf_data)
+{
+	struct mcf_esdhc_platform_data *plat_data;
+
+	if (!host->mmc->parent->platform_data) {
+		dev_err(mmc_dev(host->mmc), "no platform data!\n");
+		return -EINVAL;
+	}
+
+	plat_data = ((struct mcf_esdhc_platform_data *)
+			host->mmc->parent->platform_data);
+
+	/* Card_detect */
+	switch (plat_data->cd_type) {
+	default:
+	case ESDHC_CD_CONTROLLER:
+		/* We have a working card_detect back */
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+		break;
+	case ESDHC_CD_PERMANENT:
+		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+		break;
+	case ESDHC_CD_NONE:
+		break;
+	}
+
+	switch (plat_data->max_bus_width) {
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 1:
+	default:
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+		break;
+	}
+
+	return 0;
+}
+
+static int sdhci_esdhc_mcf_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct pltfm_mcf_data *mcf_data;
+	int err;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_mcf_pdata,
+				sizeof(*mcf_data));
+
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+	mcf_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(mcf_data->clk_ipg)) {
+		err = PTR_ERR(mcf_data->clk_ipg);
+		goto err_exit;
+	}
+
+	mcf_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(mcf_data->clk_ahb)) {
+		err = PTR_ERR(mcf_data->clk_ahb);
+		goto err_exit;
+	}
+
+	mcf_data->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(mcf_data->clk_per)) {
+		err = PTR_ERR(mcf_data->clk_per);
+		goto err_exit;
+	}
+
+	pltfm_host->clk = mcf_data->clk_per;
+	pltfm_host->clock = clk_get_rate(pltfm_host->clk);
+	err = clk_prepare_enable(mcf_data->clk_per);
+	if (err)
+		goto err_exit;
+
+	err = clk_prepare_enable(mcf_data->clk_ipg);
+	if (err) {
+		clk_disable_unprepare(mcf_data->clk_per);
+		goto err_exit;
+	}
+	err = clk_prepare_enable(mcf_data->clk_ahb);
+	if (err) {
+		clk_disable_unprepare(mcf_data->clk_per);
+		clk_disable_unprepare(mcf_data->clk_ipg);
+		goto err_exit;
+	}
+
+	err = sdhci_esdhc_mcf_plat_init(host, mcf_data);
+	if (err)
+		goto err_exit;
+
+	err = sdhci_add_host(host);
+	if (err)
+		goto err_exit;
+
+	return 0;
+
+err_exit:
+	sdhci_pltfm_free(pdev);
+
+	return err;
+}
+
+static int sdhci_esdhc_mcf_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_remove_host(host, 0);
+
+	clk_disable_unprepare(mcf_data->clk_ipg);
+	clk_disable_unprepare(mcf_data->clk_ahb);
+	clk_disable_unprepare(mcf_data->clk_per);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static struct platform_driver sdhci_esdhc_mcf_driver = {
+	.driver	= {
+		.name = "sdhci-esdhc-mcf",
+	},
+	.probe = sdhci_esdhc_mcf_probe,
+	.remove = sdhci_esdhc_mcf_remove,
+};
+
+module_platform_driver(sdhci_esdhc_mcf_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Freescale ColdFire eSDHC");
+MODULE_AUTHOR("Angelo Dureghello <angelo@xxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/mmc-esdhc-mcf.h b/include/linux/platform_data/mmc-esdhc-mcf.h
new file mode 100644
index 000000000000..85cb786a62fe
--- /dev/null
+++ b/include/linux/platform_data/mmc-esdhc-mcf.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
+#define __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
+
+enum cd_types {
+	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
+	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
+	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
+};
+
+struct mcf_esdhc_platform_data {
+	int max_bus_width;
+	int cd_type;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ */
-- 
2.20.1




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux