Re: [PATCH 1/3] mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 12, 2019 at 03:36:25PM +0200, Ulf Hansson wrote:
> On Mon, 10 Jun 2019 at 20:54, Raul E Rangel <rrangel@xxxxxxxxxxxx> wrote:
> >
> > sdhci_send_tuning uses mmc->ios.bus_width to determine the block size.
> > Without this patch the block size would be set incorrectly when the
> > bus_width == 8 which results in tuning failing.
> >
> > Signed-off-by: Raul E Rangel <rrangel@xxxxxxxxxxxx>
> > ---
> >
> >  drivers/mmc/host/sdhci-pci-o2micro.c | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> > index b29bf4e7dcb48..dd21315922c87 100644
> > --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> > +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> > @@ -115,6 +115,7 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> >          */
> >         if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
> >                 current_bus_width = mmc->ios.bus_width;
> > +               mmc->ios.bus_width = MMC_BUS_WIDTH_4;
> 
> This looks wrong.
> 
> mmc->ios.bus_width is not supposed to be updated by a host driver, but
I guess I left this part out: The O2Micro controller only supports
tuning at 4-bits. So the host driver needs to change the bus width while
tuning and then set it back when done. Ideally I would have used
`mmc_set_bus_width()`, but that is a core only function.

If `sdhci_send_tuning()` didn't rely on mmc->ios.bus_width to determine
the bus width, but instead read the HOST_CONTROL register then this
patch wouldn't be needed.
> rather the value should only be read.
> 
> >                 sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
> >         }
> >
> > @@ -126,8 +127,10 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
> >
> >         sdhci_end_tuning(host);
> >
> > -       if (current_bus_width == MMC_BUS_WIDTH_8)
> > +       if (current_bus_width == MMC_BUS_WIDTH_8) {
> > +               mmc->ios.bus_width = MMC_BUS_WIDTH_8;
> 
> Ditto.
> 
> >                 sdhci_set_bus_width(host, current_bus_width);
> > +       }
> >
> >         host->flags &= ~SDHCI_HS400_TUNING;
> >         return 0;
> > --
> > 2.22.0.rc2.383.gf4fbbf30c2-goog
> >
> 
> Kind regards
> Uffe
Thanks for the review!



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux