[PATCH v2] arm64: dts: ls1028a: Add esdhc node in dts

[Yinbo Zhu <yinbo.zhu@xxxxxxx>]

From: Ashish Kumar <Ashish.Kumar@xxxxxxx>

This patch is to add esdhc node and enable SD UHS-I,
eMMC HS200 for ls1028ardb/ls1028aqds board.

Signed-off-by: Ashish Kumar <Ashish.Kumar@xxxxxxx>
Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx>
Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
---
Change in v2:
		Update the patch title
		Add a commont in dts code

 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts |    8 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts |   13 ++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    |   27 +++++++++++++++++++++
 3 files changed, 48 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 14c79f4..180e5d2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -42,6 +42,14 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f86b054..1bfaf42 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -30,6 +30,19 @@
 	};
 };
 
+&esdhc {
+	status = "okay";
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	};
+
+&esdhc1 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 2896bbc..5c7546f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -274,6 +274,33 @@
 			status = "disabled";
 		};
 
+		esdhc: esdhc@2140000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: esdhc@2150000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <0 63 0x4>; /* Level high type */
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			broken-cd;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		sata: sata@3200000 {
 			compatible = "fsl,ls1028a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>,
-- 
1.7.1