On Tue, Apr 23, 2019 at 6:42 AM Yinbo Zhu <yinbo.zhu@xxxxxxx> wrote:
>
> From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
>
> This patch is to add esdhc node and enable SD UHS-I,
> eMMC HS200 for ls1028ardb/ls1028aqds board.
>
> Signed-off-by: Ashish Kumar <Ashish.Kumar@xxxxxxx>
> Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
> ---
> .../boot/dts/freescale/fsl-ls1028a-qds.dts | 8 ++++++
> .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 27 +++++++++++++++++++
> 3 files changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 14c79f4691ea..180e5d2a00d1 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -42,6 +42,14 @@
> status = "okay";
> };
>
> +&esdhc {
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + status = "okay";
> +};
> +
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index f86b054a74ae..1bfaf4294db4 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -30,6 +30,19 @@
> };
> };
>
> +&esdhc {
> + status = "okay";
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> + };
> +
> +&esdhc1 {
> + status = "okay";
> + mmc-hs200-1_8v;
> + };
> +
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 2896bbcfa3bb..d13cd3fb455b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -274,6 +274,33 @@
> status = "disabled";
> };
>
> + esdhc: esdhc@2140000 {
mmc@...
> + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
> + reg = <0x0 0x2140000 0x0 0x10000>;
> + interrupts = <0 28 0x4>; /* Level high type */
> + clock-frequency = <0>;
Filled in by bootloader? If so, add a comment.
> + clocks = <&clockgen 2 1>;
> + voltage-ranges = <1800 1800 3300 3300>;
> + sdhci,auto-cmd12;
> + little-endian;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + esdhc1: esdhc@2150000 {
mmc@...
> + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
> + reg = <0x0 0x2150000 0x0 0x10000>;
> + interrupts = <0 63 0x4>; /* Level high type */
> + clock-frequency = <0>;
> + clocks = <&clockgen 2 1>;
> + voltage-ranges = <1800 1800 3300 3300>;
> + sdhci,auto-cmd12;
> + broken-cd;
> + little-endian;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> sata: sata@3200000 {
> compatible = "fsl,ls1028a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.17.1
>
