Hi All I'm sorry, I had mistaken the Subject format of my patch series. I will send new patches with right format. Please ignore this series. Orito > The following patches add driver support for SD Host controller on > Socionext's Milbeaut M10V platforms. > > SD Host controller on Milbeaut is consist of two controller parts. > One is core controller F_SDH30, this is similar to sdhci-fujitsu > controller. > Another is bridge controller. This bridge controller is not compatible > with sdhci-fujitsu controller. This is special for Milbeaut series. > > It has the several parts, > - reset control > - clock enable / select for SDR50/25/12 > - hold control of DATA/CMD line > - select characteristics for WP/CD/LED line > - Re-tuning control for mode3 > - Capability setting > Timeout Clock / Base Clock / Timer Count for Re-Tuning / > Debounce period > These requires special procedures at reset or clock enable/change or > further tuning of clock. > > Takao Orito (2): > dt-bindings: mmc: sdhci-fujitsu.txt: add miilbeaut driver > mmc: sdhci_f_sdh30: Add support for Milbeaut M10V host controller > > .../devicetree/bindings/mmc/sdhci-fujitsu.txt | 22 +- > drivers/mmc/host/sdhci_f_sdh30.c | 324 +++++++++++++++++++-- > 2 files changed, 315 insertions(+), 31 deletions(-) > > -- > 1.9.1 > -- Takao Orito <orito.takao@xxxxxxxxxxxxx>
