On Fri, 22 Mar 2019 at 12:39, Christoph Muellner <christoph.muellner@xxxxxxxxxxxxxxxxxxxxx> wrote: > > When using direct commands (DCMDs) on an RK3399, we get spurious > CQE completion interrupts for the DCMD transaction slot (#31): > > [ 931.196520] ------------[ cut here ]------------ > [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 > [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 > [ 931.206909] Modules linked in: > [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 > [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) > [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) > [ 931.206927] pc : cqhci_irq+0x2e4/0x490 > [ 931.206931] lr : cqhci_irq+0x2e4/0x490 > [ 931.206933] sp : ffff00000e54bc80 > [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 > [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 > [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 > [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 > [ 931.206953] x21: 0000000000000002 x20: 000000000000001f > [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff > [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 > [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 > [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 > [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 > [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 > [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 > [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 > [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 > [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 > [ 931.207001] Call trace: > [ 931.207005] cqhci_irq+0x2e4/0x490 > [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 > [ 931.207013] sdhci_irq+0x98/0x930 > [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 > [ 931.207023] irq_thread+0x114/0x1c0 > [ 931.207027] kthread+0x128/0x130 > [ 931.207032] ret_from_fork+0x10/0x20 > [ 931.207035] ---[ end trace 0000000000000002 ]--- > > The driver shows this message only for the first spurious interrupt > by using WARN_ONCE(). Changing this to WARN() shows, that this is > happening quite frequently (up to once a second). > > Since the eMMC 5.1 specification, where CQE and CQHCI are specified, > does not mention that spurious TCN interrupts for DCMDs can be simply > ignored, we must assume that using this feature is not working reliably. > > The current implementation uses DCMD for REQ_OP_FLUSH only, and > I could not see any performance/power impact when disabling > this optional feature for RK3399. > > Therefore this patch disables DCMDs for RK3399. > > Signed-off-by: Christoph Muellner <christoph.muellner@xxxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Philipp Tomsich <philipp.tomsich@xxxxxxxxxxxxxxxxxxxxx> FYI, I leave this for arm-soc to pick up. Kind regards Uffe > --- > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > index db9d948c0b03..1a16d6ce3ea8 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi > @@ -333,6 +333,7 @@ > phys = <&emmc_phy>; > phy-names = "phy_arasan"; > power-domains = <&power RK3399_PD_EMMC>; > + disable-cqe-dcmd; > status = "disabled"; > }; > > -- > 2.11.0 >
