From: Yinbo Zhu <yinbo.zhu@xxxxxxx>
Invalid Transfer Complete (IRQSTAT[TC]) bit could be set during
multi-write operation even when the BLK_CNT in BLKATTR register
has not reached zero. Therefore, Transfer Complete might be
reported twice due to this erratum since a valid Transfer Complete
occurs when BLK_CNT reaches zero. This erratum is to fix this issue
Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
Change in v5:
write SDHCI_INT_DATA_END to SDHCI_INT_STATUS to clear it
drivers/mmc/host/sdhci-of-esdhc.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 7e0eae8dafae..6870193640d5 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -24,6 +24,7 @@
#include <linux/ktime.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -867,6 +868,25 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host,
sdhci_set_uhs_signaling(host, timing);
}
+static u32 esdhc_irq(struct sdhci_host *host, u32 intmask)
+{
+ u32 command;
+
+ if (of_find_compatible_node(NULL, NULL,
+ "fsl,p2020-esdhc")) {
+ command = SDHCI_GET_CMD(sdhci_readw(host,
+ SDHCI_COMMAND));
+ if (command == MMC_WRITE_MULTIPLE_BLOCK &&
+ sdhci_readw(host, SDHCI_BLOCK_COUNT) &&
+ intmask & SDHCI_INT_DATA_END) {
+ intmask &= ~SDHCI_INT_DATA_END;
+ sdhci_writel(host, SDHCI_INT_DATA_END,
+ SDHCI_INT_STATUS);
+ }
+ }
+ return intmask;
+}
+
#ifdef CONFIG_PM_SLEEP
static u32 esdhc_proctl;
static int esdhc_of_suspend(struct device *dev)
@@ -914,6 +934,7 @@ static const struct sdhci_ops sdhci_esdhc_be_ops = {
.set_bus_width = esdhc_pltfm_set_bus_width,
.reset = esdhc_reset,
.set_uhs_signaling = esdhc_set_uhs_signaling,
+ .irq = esdhc_irq,
};
static const struct sdhci_ops sdhci_esdhc_le_ops = {
@@ -931,6 +952,7 @@ static const struct sdhci_ops sdhci_esdhc_le_ops = {
.set_bus_width = esdhc_pltfm_set_bus_width,
.reset = esdhc_reset,
.set_uhs_signaling = esdhc_set_uhs_signaling,
+ .irq = esdhc_irq,
};
static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
--
2.17.1
