From: Ludovic Barre <ludovic.barre@xxxxxx> The "busy_detect_flag" is used to read/clear busy value of mmci status. The "busy_detect_mask" is used to manage busy irq of mmci mask. For sdmmc variant, the 2 properties have not the same offset. To clear the busyd0 status bit, we must add busy detect flag, the mmci mask is not enough. Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx> --- drivers/mmc/host/mmci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4901b73..3fa4386 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1533,7 +1533,8 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) * to make sure that both start and end interrupts are always * cleared one after the other. */ - status &= readl(host->base + MMCIMASK0); + status &= readl(host->base + MMCIMASK0) | + host->variant->busy_detect_flag; if (host->variant->busy_detect) writel(status & ~host->variant->busy_detect_mask, host->base + MMCICLEAR); -- 2.7.4
