In MMC, the discard arg is a read-only ext_csd parameter - set it once
on card init. To be consistent, do that for SD as well even though its
discard arg is always 0x0.
Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
drivers/mmc/core/block.c | 12 +++---------
drivers/mmc/core/core.c | 4 ++--
drivers/mmc/core/mmc.c | 8 ++++++++
drivers/mmc/core/sd.c | 2 ++
include/linux/mmc/card.h | 1 +
include/linux/mmc/sd.h | 5 +++++
6 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index b08fb91..131e80e 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1124,7 +1124,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->blkdata;
struct mmc_card *card = md->queue.card;
- unsigned int from, nr, arg;
+ unsigned int from, nr;
int err = 0, type = MMC_BLK_DISCARD;
blk_status_t status = BLK_STS_OK;
@@ -1136,24 +1136,18 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
from = blk_rq_pos(req);
nr = blk_rq_sectors(req);
- if (mmc_can_discard(card))
- arg = MMC_DISCARD_ARG;
- else if (mmc_can_trim(card))
- arg = MMC_TRIM_ARG;
- else
- arg = MMC_ERASE_ARG;
do {
err = 0;
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
INAND_CMD38_ARG_EXT_CSD,
- arg == MMC_TRIM_ARG ?
+ card->erase_arg == MMC_TRIM_ARG ?
INAND_CMD38_ARG_TRIM :
INAND_CMD38_ARG_ERASE,
0);
}
if (!err)
- err = mmc_erase(card, from, nr, arg);
+ err = mmc_erase(card, from, nr, card->erase_arg);
} while (err == -EIO && !mmc_blk_reset(md, card->host, type));
if (err)
status = BLK_STS_IOERR;
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 5bd58b9..de0f1a1 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2164,7 +2164,7 @@ static unsigned int mmc_align_erase_size(struct mmc_card *card,
* @card: card to erase
* @from: first sector to erase
* @nr: number of sectors to erase
- * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
+ * @arg: erase command argument (SD supports only %SD_ERASE_ARG)
*
* Caller must claim host before calling this function.
*/
@@ -2181,7 +2181,7 @@ int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
if (!card->erase_size)
return -EOPNOTSUPP;
- if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
+ if (mmc_card_sd(card) && arg != SD_ERASE_ARG)
return -EOPNOTSUPP;
if ((arg & MMC_SECURE_ARGS) &&
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index da892a5..09c688f 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1743,6 +1743,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
card->ext_csd.power_off_notification = EXT_CSD_POWER_ON;
}
+ /* set erase_arg */
+ if (mmc_can_discard(card))
+ card->erase_arg = MMC_DISCARD_ARG;
+ else if (mmc_can_trim(card))
+ card->erase_arg = MMC_TRIM_ARG;
+ else
+ card->erase_arg = MMC_ERASE_ARG;
+
/*
* Select timing interface
*/
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index d0d9f90..bd48b28 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -271,6 +271,8 @@ static int mmc_read_ssr(struct mmc_card *card)
}
}
+ card->erase_arg = SD_ERASE_ARG;
+
return 0;
}
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index de73778..8f429b6 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -277,6 +277,7 @@ struct mmc_card {
unsigned int erase_shift; /* if erase unit is power 2 */
unsigned int pref_erase; /* in sectors */
unsigned int eg_boundary; /* don't cross erase-group boundaries */
+ unsigned int erase_arg; /* erase / trim / discard */
u8 erased_byte; /* value of erased bytes */
u32 raw_cid[4]; /* raw card CID */
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index 1ebcf9b..1a6d10f 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -91,4 +91,9 @@
#define SD_SWITCH_ACCESS_DEF 0
#define SD_SWITCH_ACCESS_HS 1
+/*
+ * Erase/discard
+ */
+#define SD_ERASE_ARG 0x00000000
+
#endif /* LINUX_MMC_SD_H */
--
1.9.1
