SD specs version 4.x and 5.x have a dedicated slices in the SCR register.
Higher versions will rely on a combination of the existing fields.
Signed-off-by: Avri Altman <avri.altman@xxxxxxx>
---
drivers/mmc/core/sd.c | 5 +++++
include/linux/mmc/card.h | 2 ++
2 files changed, 7 insertions(+)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index d0d9f90..44f4cbc 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -209,6 +209,11 @@ static int mmc_decode_scr(struct mmc_card *card)
/* Check if Physical Layer Spec v3.0 is supported */
scr->sda_spec3 = UNSTUFF_BITS(resp, 47, 1);
+ if (scr->sda_spec3) {
+ scr->sda_spec4 = UNSTUFF_BITS(resp, 42, 1);
+ scr->sda_specx = UNSTUFF_BITS(resp, 38, 4);
+ }
+
if (UNSTUFF_BITS(resp, 55, 1))
card->erased_byte = 0xFF;
else
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 447648b..919e644 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -133,6 +133,8 @@ struct mmc_ext_csd {
struct sd_scr {
unsigned char sda_vsn;
unsigned char sda_spec3;
+ unsigned char sda_spec4;
+ unsigned char sda_specx;
unsigned char bus_widths;
#define SD_SCR_BUS_WIDTH_1 (1<<0)
#define SD_SCR_BUS_WIDTH_4 (1<<2)
--
1.9.1
