On Wed, 23 Jan 2019 at 20:31, Sowjanya Komatineni <skomatineni@xxxxxxxxxx> wrote: > > Below are the supported DMA types in Host Control1 Register > with Version 4 enable > b'00 - SDMA > b'01 - Not Used > b'10 - ADMA2 > b'11 - ADMA2 or ADMA3 > > ADMA3 uses Command Descriptor to issue an SD command. > A multi-block data transfer is performed by using a pair of CMD > descriptor and ADMA2 descriptor. > > ADMA3 performs multiple of multi-block data transfer by using > Integrated Descriptor which is more suitable for Command Queuing > to fetch both Command and Transfer descriptors. > > Host Capabilities register indicates the supports of ADMA3 DMA. > > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> > Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> > Reviewed-by: Thierry Reding <treding@xxxxxxxxxx> Applied for next, thanks! Kind regards Uffe > --- > [V11]: Fixed typo in commit message of this patch. > [V10]: Changes are same as V9 except this series has SDHCI core changes > into seperate patch > > drivers/mmc/host/sdhci.c | 9 ++++++++- > drivers/mmc/host/sdhci.h | 2 ++ > 2 files changed, 10 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index a22e11a65658..c6afe793399e 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -3353,7 +3353,14 @@ void sdhci_cqe_enable(struct mmc_host *mmc) > > ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); > ctrl &= ~SDHCI_CTRL_DMA_MASK; > - if (host->flags & SDHCI_USE_64_BIT_DMA) > + /* > + * Host from V4.10 supports ADMA3 DMA type. > + * ADMA3 performs integrated descriptor which is more suitable > + * for cmd queuing to fetch both command and transfer descriptors. > + */ > + if (host->v4_mode && (host->caps1 & SDHCI_CAN_DO_ADMA3)) > + ctrl |= SDHCI_CTRL_ADMA3; > + else if (host->flags & SDHCI_USE_64_BIT_DMA) > ctrl |= SDHCI_CTRL_ADMA64; > else > ctrl |= SDHCI_CTRL_ADMA32; > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index 6cc9a3c2ac66..4070be49d947 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -88,6 +88,7 @@ > #define SDHCI_CTRL_ADMA1 0x08 > #define SDHCI_CTRL_ADMA32 0x10 > #define SDHCI_CTRL_ADMA64 0x18 > +#define SDHCI_CTRL_ADMA3 0x18 > #define SDHCI_CTRL_8BITBUS 0x20 > #define SDHCI_CTRL_CDTEST_INS 0x40 > #define SDHCI_CTRL_CDTEST_EN 0x80 > @@ -230,6 +231,7 @@ > #define SDHCI_RETUNING_MODE_SHIFT 14 > #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 > #define SDHCI_CLOCK_MUL_SHIFT 16 > +#define SDHCI_CAN_DO_ADMA3 0x08000000 > #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ > > #define SDHCI_CAPABILITIES_1 0x44 > -- > 2.7.4 >
