On Fri, Jan 11, 2019 at 04:38:47PM +0530, Faiz Abbas wrote:
> From: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
The subject is misleading. You are adding new properties, not just
changing an example.
>
> sdhci-omap can support both external dma controller via dmaengine
> framework as well as ADMA which standard SD host controller
> provides.
>
> Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
> Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
> ---
> Documentation/devicetree/bindings/mmc/sdhci-omap.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
> index 72c4dec7e1db..f8914a2a2aec 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
> @@ -14,6 +14,11 @@ Required properties:
> "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11",
> "hs200_1_8v",
> - pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
> +- dmas: List of DMA specifiers with the controller specific format as described
> + in the generic DMA client binding. A tx and rx specifier is required.
> +- dma-names: List of DMA request names. These strings correspond 1:1 with the
> + DMA specifiers listed in dmas. The string naming is to be "rx"
> + and "tx" for RX and TX DMA requests, respectively.
The ordering of rx and tx should be defined and you have a mixture.
>
> Example:
> mmc1: mmc@4809c000 {
> @@ -22,4 +27,6 @@ Example:
> ti,hwmods = "mmc1";
> bus-width = <4>;
> vmmc-supply = <&vmmc>; /* phandle to regulator node */
> + dmas = <&sdma 61 &sdma 62>;
> + dma-names = "tx", "rx";
> };
> --
> 2.19.2
>
